just another "is this possible" post
05-23-2002, 02:07 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: Long Beach, CA, USA
Posts: 3,969
Likes: 0
Received 0 Likes
on
0 Posts
just another "is this possible" post
b18c1-Headwork, CTR intake cam, JDM ITR header, Crower springs, ITR valves, stock bottom end. 12.5 1/4 mile... in a stripped hatchback, lexan windows, on slicks stock suspension CX wheels.....?
05-24-2002, 09:00 AM
#5
Honda-Tech Member
Join Date: Nov 2001
Location: San Diego, CA
Posts: 6,720
Likes: 0
Received 0 Likes
on
0 Posts
Re: just another "is this possible" post (MaliceGSR)
Well here's how I look at it...
...in my C1 92 CX I ran a 13.8 with an intake and intake manifold on my stock steelies. With slicks I'm guessing I could pull a 13.3. With a header, bump it down to about 13.1. Basic bolt-ons plus slicks - about 13.1. Now totally gut the hatch, lexan windows, some internal work - with a good driver a 12.5 may be possible.
...in my C1 92 CX I ran a 13.8 with an intake and intake manifold on my stock steelies. With slicks I'm guessing I could pull a 13.3. With a header, bump it down to about 13.1. Basic bolt-ons plus slicks - about 13.1. Now totally gut the hatch, lexan windows, some internal work - with a good driver a 12.5 may be possible.
05-24-2002, 09:58 AM
#6
New User
Join Date: Mar 2001
Location: Los Angeles, Ca, USA
Posts: 2,114
Likes: 0
Received 0 Likes
on
0 Posts
Re: just another "is this possible" post (hybridreams)
It all depends on how much headwork and what track your running at. Without a doubt it can be done but it will be tuff.
Thread
Thread Starter
Forum
Replies
Last Post
Mr.Sha007
Honda Civic / Del Sol (1992 - 2000)
39
06-09-2002 04:50 PM