I posted an ECT sensor problem about a week ago regarding my 95JDM H22A in my 2000 accord and it reading 270 via hondata, nobody ever answered the question, infact, it appears to have been deleted.

Basicly the problem was that ever since I did the H22 swap it has been reading 70 F too high, I resolved the problem this week by installing a 150 ohm resistor in series with the sensor. (and no, the sensor wasn't bad, I swapped it with a good one and got the exact same result) Ever since I installed the resistor the engine starts first try every time now, and the performance has been black and white in comparison.

So if anyone else ever does this swap and finds this issue, try this solution.