i just got a oil line kit from someone at thepartstrader. is this everything. anyways. can i just use the small tap to tap the whole. or do i really need to run oil lines everywhere. i saw cspeedracing.coms how-to's and it looks like they have more parts than i do. please tell me i can just tap the whole.

thanx. oh and the block is obd1(96-97) and head is obd2 ('00 ITR)


[Modified by baonest, 7:01 PM 10/14/2002]

 

i forgot to mention, this was the inline 4 kit. http://www.inlinefour.com/lsvtecharkit.html

 

 

not sure what ur gunna have to tap or anything, but i know u have all the parts...urs are just put together, just looks like u have less.

good luck with the project!

 

You're going to tap (1/8" npt) the oil return hole on the bottom face of the VTEC head and plug it up with that small little tiny plug that you got.

The tee goes to the back of the block, and that single fitting goes onto the head.

-Dawn

 

good deal, thanx a lot guys. i e-mailed inlinefour to see if i can get a diagram. again, thanx fer the info