Bad o2 Sim??
#1
Thread Starter
Join Date: Apr 2003
Location: Livingston Manor, New York, USA
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Bad o2 Sim??
ive got my o2 sim from o2simulator last week and this is how i wired it
It is attached after the plug right under where my test pipe is, was fairly easy to wire... so i thought, white went to white, which was the remote and i left the cut end on the plug side detatched, like the diagram had shown, I located 12v and spliced it into the red. The Green was then attached to the black for a ground...and last was the heater wire which was left alone?? but still the LED doesnt blink?? possible it is a bad o2 sim????
It is attached after the plug right under where my test pipe is, was fairly easy to wire... so i thought, white went to white, which was the remote and i left the cut end on the plug side detatched, like the diagram had shown, I located 12v and spliced it into the red. The Green was then attached to the black for a ground...and last was the heater wire which was left alone?? but still the LED doesnt blink?? possible it is a bad o2 sim????
Thread
Thread Starter
Forum
Replies
Last Post
91efbluehatch
Honda CRX / EF Civic (1988 - 1991)
13
11-07-2012 06:21 AM