im about to build my b20 vtec this week and ive been reading alot about clearance issues..and also about how much power this setup makes..im goin to be running a stock b20b block..stock pistons,arp rod bolts..or course vtec oil and water pumps..ls crank and ls rods..b16 head..pretty much fully worked..full port and polish,skunk 2 springs and retainers..itr headers..evo2 exhaust..comptech box intake..b16 tranny..stage 2 clutch..im plan on using skunk 2 stage 2 cams..so my question is will have clearance issues with these cams..if so what should i do..and about how much power will this setup make..please help..