b18C6 swap sensor problem

Reply Subscribe

Thread Tools

Search this Thread

Feb 6, 2010 | 08:27 AM

haukurn

Thread Starter

Honda-Tech Member

Joined: Apr 2008

Posts: 66

Likes: 0

From: hafnarfjordur, 220, reykjavik

b18C6 swap sensor problem

this thing in red circle is not on my b18C6 motor, but the sensor for it is in my harness (b16a2 harness), do i swap this thing from my b16a2 motor that is in the yellow circle to my b18C6 or should i just leave this sensor alone ?

Feb 6, 2010 | 03:56 PM

canadaek

Honda-Tech Member

Joined: Dec 2009

Posts: 1,529

Likes: 1

From: ontario canada

Re: b18C6 swap sensor problem

thats your vtec pressure sensor jdm motors don't use it what ecu are you using ? if keeping the usdm ecu change it if using jdm ecu don't worry about it

Feb 7, 2010 | 05:11 AM

haukurn

Thread Starter

Honda-Tech Member

Joined: Apr 2008

Posts: 66

Likes: 0

From: hafnarfjordur, 220, reykjavik

Re: b18C6 swap sensor problem

Quote:

Originally Posted by canadaek

thats your vtec pressure sensor jdm motors don't use it what ecu are you using ? if keeping the usdm ecu change it if using jdm ecu don't worry about it

im using P30