Read a few threads over them not much. Anyone using them? http://www.innovativemounts.co...20050

Also what axles are you guys using with these?


Modified by DFW at 1:06 PM 6/14/2006

I have them and love them the fitment is great.
I also sell them.

Would not use anything other

Anyone else?

Also would it be better to get the 75a if I plan on boosting the motor down the road? How rough is it compared to the 60a?

I just received mine and the product looks good. No instructions came with but an ounce of common sense gets you in business. I do need to contact them on Tuesday because of a problem with a wrong bracket???? I don't know. I just asked the question a minute ago. https://honda-tech.com/zerothread/1643157

Who did you order them from?

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DFW &raquo;</TD></TR><TR><TD CLASS="quote">Who did you order them from?</TD></TR></TABLE>

PasswordJDM

They seem like good guys (I found the mounts a couple dollars cheaper somewhere else, but I thought Password seemed more legit). They messed up the shipping and it didn't ship out for over a week after I bought them. I called everyday asking why I didn't get a tracking number and got "The mounts have already shipped and we will email you the tracking number in a few minutes". Finally over a week after sending the money I got a little ugly over the phone and the guy admitted they lost the paperwork. That night I got the tracking number and received them a few days later.

I wouldn't hold that against them, but I hate being lied to just to get me off the phone.

Should've gotten them from on of the sponsors here, it's cheaper too probably. Did you get the billet mounts or regular ones?

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DFW &raquo;</TD></TR><TR><TD CLASS="quote">Should've gotten them from on of the sponsors here, it's cheaper too probably.</TD></TR></TABLE>

Yea I checked one of the sponsors and it was about 4 bucks cheaper. Their main page was down and they were trying to sell through a thread. It was a little too fishy to save 4 bucks (Ive been scammed on a B16 swap before, so I have trust issues).


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DFW &raquo;</TD></TR><TR><TD CLASS="quote">Did you get the billet mounts or regular ones?</TD></TR></TABLE>

I got the welded steel mounts. I like them better than the billet aluminum. My car is for go... not show. I figured I would save the money for more go-fast parts instead of having pretty mounts.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1990crxsir &raquo;</TD></TR><TR><TD CLASS="quote">Yea I checked one of the sponsors and it was about 4 bucks cheaper. Their main page was down and they were trying to sell through a thread. It was a little too fishy to save 4 bucks (Ive been scammed on a B16 swap before, so I have trust issues).


I got the welded steel mounts. I like them better than the billet aluminum. My car is for go... not show. I figured I would save the money for more go-fast parts instead of having pretty mounts.</TD></TR></TABLE>

Did you get the 75a?

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DFW &raquo;</TD></TR><TR><TD CLASS="quote">Did you get the 75a?</TD></TR></TABLE>

B]QUOTE=GHOSTWORKS]finally done!.... its been long and grueling work this past week, pushing almost 14 hour days for a week straight to get the car ready for a cover shoot witch will be released this september of 2006, and over 3800 hours to finally be so close to being finished i would like to thank all my sponsors that help me get to where i am with this project and all the encouragement to get it done when i wanted to give up on the dam thing .. thank you for all your support and im gonna sleep for a week... and wake up and drive to colorado

tony @ american wholesale finance for helping me out through the years
rob, robby @ rps performance products for great clutches 9 years strong!
kim @ rota wheel for great performing wheels
tom @ camp1320.com for coming through on my parts
james @ jg-fab.com great customer service and manifolds #1
tim @ innovative mounts for the best mounts in the business
gary @ gns dist. for all the support
eric and john @ stick it graphics for all the support and stickers
shorty my homie for life, you always come through!
madness racing for all the team support
jeremy @ drag cartel for the dvs apparel
danny @ promod fab for the great cage work
john @ orme bros for all my hose and fitting needs
bob @ chatsworth tires for the hook up
tom jung @ arias pistons for great pistons and customer support
vince tiaga @ arias for the great hook up
robert @ golden eagle for all the machine work and support
frank @ dss for the support
thank you couldnt of done it without you guys






















some motor pictures and dash pitures have been updated with new parts pm me if your interested in brand new parts and turbo equipment thanks

[/QUOTE][/B]

We have street guys , sportman, and pro using them. and we also sell them for a great price

https://honda-tech.com/zerothread/1607869

Thanks for the responses

Anyone using these with H22 swaps? How does the motor site compared to Hasports?

Also what axles are you guys using with these?


Modified by DFW at 1:06 PM 6/14/2006

bump

Damn does no one use these??