HOT STUFF
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 3,993
Likes: 0
From: Somewhere in, IL, United States
HOT STUFF
Honda-Tech Member
Joined: Apr 2001
Posts: 3,738
Likes: 0
Re: HOT STUFF (Y2K_S2K)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Y2K_S2K »</TD></TR><TR><TD CLASS="quote">i just thought i'd share 
https://honda-tech.com/zerothread?id=1039520
comments, thoughts, feelings? </TD></TR></TABLE>
what type of amuse exhuast did you order?
btw those are some hot parts
https://honda-tech.com/zerothread?id=1039520 comments, thoughts, feelings? </TD></TR></TABLE>
what type of amuse exhuast did you order?
btw those are some hot parts
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 3,993
Likes: 0
From: Somewhere in, IL, United States
Re: HOT STUFF (Razor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Razor »</TD></TR><TR><TD CLASS="quote">
what type of amuse exhuast did you order?
btw those are some hot parts </TD></TR></TABLE>
the loudest one R1000
[QUOTE=PROFILES2000]i know the feeling :thumbsup:
What color is your car?
Berlina Black
what type of amuse exhuast did you order?
btw those are some hot parts
</TD></TR></TABLE>the loudest one R1000
[QUOTE=PROFILES2000]i know the feeling :thumbsup:
What color is your car?
Berlina Black
Trending Topics
Joined: Oct 2004
Posts: 20
Likes: 0
From: Carmel, IN, USA
Re: HOT STUFF (Y2K_S2K)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Y2K_S2K »</TD></TR><TR><TD CLASS="quote">
i just thought i'd share https://honda-tech.com/zerothread?id=1039520
comments, thoughts, feelings? </TD></TR></TABLE>
comments, thoughts, feelings?....Why are you wasting time posting? Get in the garage and start installing that stuff!
i just thought i'd share
https://honda-tech.com/zerothread?id=1039520 comments, thoughts, feelings? </TD></TR></TABLE>
comments, thoughts, feelings?....Why are you wasting time posting? Get in the garage and start installing that stuff!
Honda-Tech Member
Joined: Oct 2001
Posts: 3,310
Likes: 5
From: ILM, NC
Re: HOT STUFF (Y2K_S2K)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Y2K_S2K »</TD></TR><TR><TD CLASS="quote">
comments, thoughts, feelings? </TD></TR></TABLE>
how are those seats going to fit?
the reason i ask is....a friend of mine just purchased a set of sparco milano prestige seats and you have to remove the adjusting ***** to install in the car... which pretty much sucks if you ask me.....
and you also have to pretty much use a harness belt, because you have to rig up the factory seatbelts.....because there is not enough room on the sides.....
comments, thoughts, feelings? </TD></TR></TABLE>
how are those seats going to fit?
the reason i ask is....a friend of mine just purchased a set of sparco milano prestige seats and you have to remove the adjusting ***** to install in the car... which pretty much sucks if you ask me.....
and you also have to pretty much use a harness belt, because you have to rig up the factory seatbelts.....because there is not enough room on the sides.....
Joined: Jul 2003
Posts: 806
Likes: 0
From: TX
Re: HOT STUFF (cmdr430)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cmdr430 »</TD></TR><TR><TD CLASS="quote">how are those seats going to fit?
the reason i ask is....a friend of mine just purchased a set of sparco milano prestige seats and you have to remove the adjusting ***** to install in the car... which pretty much sucks if you ask me.....
and you also have to pretty much use a harness belt, because you have to rig up the factory seatbelts.....because there is not enough room on the sides.....</TD></TR></TABLE>
yup, you do have to remove the sides. also, in regards to a harness, without a roll bar and it being properly mounted, it is just a death belt if something should go wrong. your spine will be crushed and/or you will be flattened which will just lead to decapitation. while it is least likely to happen, I would hate to take those risks.
the reason i ask is....a friend of mine just purchased a set of sparco milano prestige seats and you have to remove the adjusting ***** to install in the car... which pretty much sucks if you ask me.....
and you also have to pretty much use a harness belt, because you have to rig up the factory seatbelts.....because there is not enough room on the sides.....</TD></TR></TABLE>
yup, you do have to remove the sides. also, in regards to a harness, without a roll bar and it being properly mounted, it is just a death belt if something should go wrong. your spine will be crushed and/or you will be flattened which will just lead to decapitation. while it is least likely to happen, I would hate to take those risks.
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 3,993
Likes: 0
From: Somewhere in, IL, United States
Re: HOT STUFF (Mr. Bagel)
the seat brackets i have are two different kind as you can see in the pic below ...
the half or smaller adjusting lever goes the passenger side ... so i dont see the
reason y i have to remove it ?
the half or smaller adjusting lever goes the passenger side ... so i dont see the
reason y i have to remove it ?
Honda-Tech Member
Joined: Oct 2001
Posts: 3,310
Likes: 5
From: ILM, NC
Re: HOT STUFF (Y2K_S2K)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Y2K_S2K »</TD></TR><TR><TD CLASS="quote">the seat brackets i have are two different kind as you can see in the pic below ...
</TD></TR></TABLE>
not the seat brackets..... the reclining ***** on the sides.....
thus meaning you cannot recline the seats when they are in the vehicle (not that there is enough room to do that anyways)....
you have to set them in the right position before you install them
which means you could have saved some money on a fixed position seat....
</TD></TR></TABLE>
not the seat brackets..... the reclining ***** on the sides.....
thus meaning you cannot recline the seats when they are in the vehicle (not that there is enough room to do that anyways)....
you have to set them in the right position before you install them
which means you could have saved some money on a fixed position seat....
Honda-Tech Member
Joined: May 2004
Posts: 3,003
Likes: 0
From: N. Indiana
Re: HOT STUFF (ExcelcivicSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExcelcivicSi »</TD></TR><TR><TD CLASS="quote">damn that is crazy...i have to ask did you buy all those parts at once?</TD></TR></TABLE>
Honda-Tech Member
Joined: Apr 2003
Posts: 9,051
Likes: 1
From: Bay Area, CA
Re: HOT STUFF (Nishant)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nishant »</TD></TR><TR><TD CLASS="quote">did you just rob a bank 
</TD></TR></TABLE>
umm well said..
and also.. TALK ABOUT RUBBING YOUR RICHNESS IN OUR FACE!!
sheesh.
</TD></TR></TABLE>umm well said..
and also.. TALK ABOUT RUBBING YOUR RICHNESS IN OUR FACE!!
sheesh.
GatorNATION
Joined: Jun 2004
Posts: 599
Likes: 0
From: FL
Re: HOT STUFF (endless_pain)
After all the quality parts you just picked up, why did you go with the ARC Induction Box, which has been dyno proven to gain no power (thats if you don't lose any from using it in the first place)?
Why not the Mugen or J's Racing piece?
Why not the Mugen or J's Racing piece?
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 3,993
Likes: 0
From: Somewhere in, IL, United States
Re: (Tad)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tad »</TD></TR><TR><TD CLASS="quote">just go to autozone and get a $20 cone filter,
strap it on with some zipties and be done with it!!!
ahhahaa, that'd be hilarous, all those $$$ parts and an autozone shortram!</TD></TR></TABLE>
ehhh i just baught the part cuz i got bored .... if i get bored with that part again
imma buy me a new one ....
i dunno what to do with my money so Tad , dont be jealous ....
Modified by Y2K_S2K at 9:03 AM 11/2/2004
strap it on with some zipties and be done with it!!!
ahhahaa, that'd be hilarous, all those $$$ parts and an autozone shortram!</TD></TR></TABLE>
ehhh i just baught the part cuz i got bored .... if i get bored with that part again
imma buy me a new one ....
i dunno what to do with my money so
Tad , dont be jealous ....Modified by Y2K_S2K at 9:03 AM 11/2/2004
