I was searching but then i was getting a little confused. i began reading on OBD-I and OBD-II p72. the case is my friend came up on a GSR and is giving me the ecu for free. im assuming is OBD-II since it is a 1996. I also read it controls IAB's which is helpful and i would be buying Hondata s200 to be used with it. i only have intake and exhaust but want my car to fun a little harder (97 prelude). Is this ecu/ setup recommended? If so approx how many gains will i obtain with this and a tune?


Modified by 97BB6Type-SH at 11:12 AM 7/3/2008

 

You need an OBD1 ecu and adapter harness.

http://www.hondata.com/engines.html

 

Well i jus spke to him and he also has an OBD-1 p72. so do anyone know how this set-up will run?

 

https://honda-tech.com/zerothread/2266933

 

Find a tuner that tunes using Hondata near you and than ask Him!

The tune is only as good as the tuner. You can buy the best and most expensive piece of technology out there but if you can't get some one proficient to program it, its going to be an expensive piece of shiet.

Or get freeware, learn to do it yourself and save some money.

Eitherway, start with finding a Tuner, and ask him about his opinions.

 

Thanks alot! that thread helped out. i might just send the ecu to get chipped to Phearable.net .