need to know what size stock prelude injectors are. i was told that they are 310's. can anyone confirm this please

 

what year? what engine?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by md23vtec &raquo;</TD></TR><TR><TD CLASS="quote">what year? what engine?</TD></TR></TABLE>

H22 usdm 96

 

I think they're 290, but I'm not 100% sure

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clayton bigsby &raquo;</TD></TR><TR><TD CLASS="quote">

H22 usdm 96</TD></TR></TABLE>

340cc peak and hold injectors. The 97 and up (h22a4) 310's. Out of couriousty why did you need to know or just wanted to know?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by md23vtec &raquo;</TD></TR><TR><TD CLASS="quote">
Out of couriousty why did you need to know or just wanted to know?</TD></TR></TABLE>

because im doing a H22-H23 swap in a civic and im planing on not running peak and hold injectors, and was wondering if my RC'310's are gonna be good enough. i also plan on running a chipped P28 from erick's racing, thats why i wanted to know.

 

what is peak and hold mean

 

Stock H22 or H23 or built up? Is it just some random **** chip or you going to have it tuned for the car?

F.Y.I sometimes less is more. We had a stock P13 with an afc usdm 340cc injectors with a resistor box, in a usdm h22 Eg hatch went 12.74 @ 106 (slicks)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97h22a9 &raquo;</TD></TR><TR><TD CLASS="quote">what is peak and hold mean</TD></TR></TABLE>

The actual resistance of the injector. High impedance or low impedence

 

i dont understand
resistance? impedance?