F20B 97-98 Long Block
200Hp 145Trq 11.0 Compression (JDM)

these are the specs need to know if they share the same head as the h22 also if trannies are the same and dizzy ecu... im looking into swapping one into a civic

 

you should have kept this all in one thread

yes the H tranny or the F trann will match

 

sorry im trying to do some quick research before my bro leaves to canada to pick up some motors i also need to know if the bore is frm

 

found this i just need to know if forged internals can be run without sleeving

https://honda-tech.com/zerothread?id=654239

sorry im scattering for answers because the person my brother is picking the engines up from has one for a good price and i need answers before i can drop money on it

 

85mm bore. Standard liners.

 

iron sleeves, 85mm 88mm storke, similar head to h22, not exact as far as oil drains.

 

Does anyone make "off the self" internals for this motor?

 

pistons probably, rods i REALLY doubt it,

 

i will know in a little bit i just bought a f20b for a turbo build in a hatch so i will be contacting crower to see if they have a aplication if not im gonna research rod diferences in the b 20

 

grim, all this stuff is in the FAQs bud, just take a look around

 

Damn! I was hoping for after market rods. I know their bores are smaller, but I don't see anything a little machine work won't fix according to the numbers.


Modified by Televator at 8:09 AM 12/18/2006