Ok as some may kno i have a 1st gen crv that is on coilovers and slammed. I got all new tie rods, upper control arms, and lower ball joints. My lower ball joint on the drivers side has been squeakin since a month after i p[ut them in. I greesed them through the boot with a grease needle and it stopped for a month or so and its starting to come back. There is no play in the joint at all. My question is, did i get a bad joint??? My passenger side makes no sound and its the same brand joint

 

it might be the struts....
what struts are you using?... usually when i drop my crv i get the same thing...but when i raise it up a bit...itll go away

 

Function and form coil overs. Its not the strut, if i have someone in the car and turn the wheel side to side while my hand is on the joint nut i feel it. I know for sure its the joint. My whole front end is all the same age. Like 4 months old