Hey guys finally decided to do the Integra dash swap in my EG and got through the first steps in a breeze. (Dash removal, heater core removal and swap) I have moved on to the wiring and was following the instructions: however here is my issue

Integra Wire --> Civic Wire
WHT/GRN --> WHT/GRN = matched
RED/GRN --> RED/GRN = matched
RED --> RED = matched
BRN/BLK --> BRN/BLK = matched
YEL/GRN --> YEL/GRN = matched
BLUE --> BLUE (2 White Dots) = matched
Deep Blue --> Deep Blue (SRS) I do not have a deep blue wire on my Integra harness
GRN/ORG --> GRN/ORG = matched
YEL/RED --> YEL/RED = matched
ORANGE --> YEL/BLUE = matched
BLUE/YEL --> BLUE/YEL = matched

I have an extra wire on the civic plug it’s Pink w/ green stripe: any one know what this is?????
The following Integra wires will be left out: = I left all these wires out like it says
RED/BLUE
BLUE/RED
LIME GREEN
YELLOW
Blue (1 White Dot)

My civic harness is from a 94, and I was told the dash harness was from a 96…I need help ASAP.

I also posted this in the FAQ Thread as well Somebody please get back to me

Thanks,

 

if pix will help i can post them us too...let me know

thanks

 

anyone?

 

a little help ppl

 

heeeeeeeeeeellllllllpppppppppppppp