TDC interuption problems
05-17-2007, 11:35 AM
#1
Thread Starter
Join Date: May 2007
Location: sarasota, fl, united states
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
TDC interuption problems
i have a 2001 honda civic that keeps throwing a code of tdc interuption which makes the car run like total crap. Any Ideas?
06-01-2007, 08:07 PM
#5
Re: (FIVESTARR*EM2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FIVESTARR*EM2 »</TD></TR><TR><TD CLASS="quote">try to change out your coils and spark plugs.</TD></TR></TABLE>
how would that help?
what P0 code are you getting specifically?
how would that help?
what P0 code are you getting specifically?
06-02-2007, 06:13 PM
#6
Junior Member
Join Date: Jun 2005
Location: TX, us
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Re: (skipbarber)
If you go to autozone to get a code check. my came out to be
P1362
Here is what the possible problems.
-Ignition Control module (ICM) bypass circuit low input
-Cylinder 3 Ignition Circuit Short to B+ Explanation.
-Misfiring during start cylinder 11
-TDC No Signal
-No signal in TDC 1 Sensor Circuit.
So it could be your coils or your tdc sensor.
P1362
Here is what the possible problems.
-Ignition Control module (ICM) bypass circuit low input
-Cylinder 3 Ignition Circuit Short to B+ Explanation.
-Misfiring during start cylinder 11
-TDC No Signal
-No signal in TDC 1 Sensor Circuit.
So it could be your coils or your tdc sensor.
06-06-2007, 02:40 PM
#7
Join Date: Jun 2007
Location: sarasota, fl, us
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: (FIVESTARR*EM2)
well, its my civic and I have replaced all the coil packs and new plugs..... and now im getting an error code when trying to scan the computer..... it wont let me communicate at all...... what can i do?? please help
the mechanic that has it says the ground is ok and says that there is voltage where there shouldnt be in the wiring?? how would that be?
he said it measures 1.5 volts when there should be none any suggestions???
the cam backfires and wont respond under boost...the tachometer stopped working the temperature gauge stopped working and the battery light tends to come on and go off......but the alternator is brand new and so are all the belts and hoses as well as battery.
????????????????
the mechanic that has it says the ground is ok and says that there is voltage where there shouldnt be in the wiring?? how would that be?
he said it measures 1.5 volts when there should be none any suggestions???
the cam backfires and wont respond under boost...the tachometer stopped working the temperature gauge stopped working and the battery light tends to come on and go off......but the alternator is brand new and so are all the belts and hoses as well as battery.
????????????????
Trending Topics
06-25-2007, 05:13 AM
#9
Join Date: Jun 2007
Location: Guysborough, Nova Scotia, Canada
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: (FIVESTARR*EM2)
yes, definetely check your fuel pump. lol, i remember going through that ****. took forever. And no tech seemed to have an answer. Fuel pump wasn't working properly. voltage said everything was fine, but I checked it and it wasn't working. . Could be that problem, not saying it is. Good Luck.
Thread
Thread Starter
Forum
Replies
Last Post
lax1089
Honda Accord (1990 - 2002)
8
04-19-2007 11:02 AM
