Hyper16Valve Reppin SoCAL
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Jan 2007
Posts: 3,954
Likes: 0
From: WESTCOAST,HAWAIIANSTYLE, PA KA LO LO
HYPER16VALVE motorworks building another B20vtec 200+ whp and this will be tuned @ PROSTREETimport...
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Jan 2007
Posts: 3,954
Likes: 0
From: WESTCOAST,HAWAIIANSTYLE, PA KA LO LO
DAmn I've been pretty busy building a 2litre engine also getting around to fixing my OLD school DA...
Engine...

DECKed BLOCK,HOT Tanked,BORED and HONED for 85mm RS itr style cast pistons...

This engine should be around 12.1 compression good for 91 pump gas...

GSR block gridle to help with some HIGH REVS...

CTR pulley with NEW oem vtec oil pump...

Tuning will be with S200 HOndata...

Fuel is coming from some 315cc ford injectors,air VIA skunk2 manifold,with a 70mm TB port matched...

Some TRI Y headers

This is how the OIL is going to feed the B16A head for VTEC and Oil pressure line for Oil pressure gaudge,DATUM sandwich plate...

Well here my BELOVED wheels that the HOMIE help get for me NEW look...

FULLY polished thanks to GWAN American BrightWorks INC...
Now the old school DA getting some LOVE...


Well just wanna say whats up to all the HYPER16VALVE heads...
Engine...

DECKed BLOCK,HOT Tanked,BORED and HONED for 85mm RS itr style cast pistons...

This engine should be around 12.1 compression good for 91 pump gas...

GSR block gridle to help with some HIGH REVS...

CTR pulley with NEW oem vtec oil pump...

Tuning will be with S200 HOndata...

Fuel is coming from some 315cc ford injectors,air VIA skunk2 manifold,with a 70mm TB port matched...

Some TRI Y headers

This is how the OIL is going to feed the B16A head for VTEC and Oil pressure line for Oil pressure gaudge,DATUM sandwich plate...

Well here my BELOVED wheels that the HOMIE help get for me NEW look...

FULLY polished thanks to GWAN American BrightWorks INC...
Now the old school DA getting some LOVE...


Well just wanna say whats up to all the HYPER16VALVE heads...
Last edited by MOE@Hyper16Valve; Apr 9, 2009 at 09:22 AM.
Clean!! I saw in a TV show they used chrome paint on a car. The painter needed a speacial gun and had a procedure on how to apply it. Ur Bay painted that way will stand out!! Flow real nice with ur wheels and engine!! Bump 4 More. One of the Low Offset Pioneers!
Honda-Tech Member
Joined: Jun 2004
Posts: 1,392
Likes: 0
From: Home where gangbangers reside, CA, usa
it looks alright...hahah!! and who might those be...trying to step up!! Race Car is down.. Must be a dropped valve or rod knock... ohh well.
**** lookin hot, wat the side of ur exhaust? how they sound?, im plan sell my invidia n get custom similar to ur!!!
Last edited by hai_tech; May 9, 2009 at 10:04 PM.














