::: EM1 STATUS THREAD :::
not yet. once i get a daily i probably will. lol. might even get it next week. this build is getting expensive. i do want to start auto-x soon. just need to get a better suspension.
Thread Starter
Junior Member
Joined: Jun 2008
Posts: 224
Likes: 0
From: Dont Hesitate to Hate
Re: (Si Jeff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Si Jeff »</TD></TR><TR><TD CLASS="quote">not yet. once i get a daily i probably will. lol. might even get it next week. this build is getting expensive. i do want to start auto-x soon. just need to get a better suspension. </TD></TR></TABLE>
put a LS fifth in there for better gas mileage with a 4.7FD lol... i have a similar build in the works. as for auto-x its definitely something fun to get into. the most important upgrade you can have for that type of event is the tires.
put a LS fifth in there for better gas mileage with a 4.7FD lol... i have a similar build in the works. as for auto-x its definitely something fun to get into. the most important upgrade you can have for that type of event is the tires.
Re: (Manny Effin Fresh)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Manny Effin Fresh »</TD></TR><TR><TD CLASS="quote">Welcome mikeycivic
</TD></TR></TABLE>
clean
</TD></TR></TABLE> clean
Honda-Tech Member
Joined: Feb 2006
Posts: 14,813
Likes: 1
From: Fa Cough, PA
Re: (eg_junior)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg_junior »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
ditto
</TD></TR></TABLE>
ditto
Don't call it a comeback
Joined: Oct 2001
Posts: 20,968
Likes: 0
From: Greenville SC
B*a*n*n*e*d
Joined: Oct 2003
Posts: 13,235
Likes: 0
From: BAWLSTON
Re: (Manny Effin Fresh)
Thanks Manny, I would like to extend an apology to all regarding the previous post. I spoke with Manny and we all share a love for a specific chassis/car and I can't fault the reason why the old thread could not continue. to fellow EM1/B-Series lovers.
Modified by SIRIUS at 4:55 PM 9/28/2008
to fellow EM1/B-Series lovers. Modified by SIRIUS at 4:55 PM 9/28/2008
Don't call it a comeback
Joined: Oct 2001
Posts: 20,968
Likes: 0
From: Greenville SC
Re: (Kicklow)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kicklow »</TD></TR><TR><TD CLASS="quote">stunna ben is my lover!!!!
i may finally get the few new pieces on the shiitbox that have been sitting here for almost 6 months. possible new pics coming soon!</TD></TR></TABLE>
Kocklow!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIRIUS »</TD></TR><TR><TD CLASS="quote">Thanks Manny, I would lie to extend an apology to all regarding the previous post. I spoke with Manny and we all share a love for a specific chassis/car and I can't fault the reason why the old thread could not continue. to fellow EM1/B-Series lovers. </TD></TR></TABLE>
awesome outlook bro.
anyone gets time, read the blog about the security taking me off the plane!
i may finally get the few new pieces on the shiitbox that have been sitting here for almost 6 months. possible new pics coming soon!</TD></TR></TABLE>
Kocklow!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIRIUS »</TD></TR><TR><TD CLASS="quote">Thanks Manny, I would lie to extend an apology to all regarding the previous post. I spoke with Manny and we all share a love for a specific chassis/car and I can't fault the reason why the old thread could not continue. to fellow EM1/B-Series lovers. </TD></TR></TABLE>
awesome outlook bro.
anyone gets time, read the blog about the security taking me off the plane!
Thread Starter
Junior Member
Joined: Jun 2008
Posts: 224
Likes: 0
From: Dont Hesitate to Hate
Re: (SIRIUS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIRIUS »</TD></TR><TR><TD CLASS="quote">Thanks Manny, I would lie to extend an apology to all regarding the previous post. I spoke with Manny and we all share a love for a specific chassis/car and I can't fault the reason why the old thread could not continue. to fellow EM1/B-Series lovers. </TD></TR></TABLE>
Not a problem. It's all about respecting each others views and coming to a common understanding.
to fellow EM1/B-Series lovers. </TD></TR></TABLE>Not a problem. It's all about respecting each others views and coming to a common understanding.
B*a*n*n*e*d
Joined: Oct 2003
Posts: 13,235
Likes: 0
From: BAWLSTON
Re: (Stunna BEN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stunna BEN »</TD></TR><TR><TD CLASS="quote">
Kocklow!!!
awesome outlook bro.
anyone gets time, read the blog about the security taking me off the plane!</TD></TR></TABLE>
I read it earlier. I would imagine the equipment you lug around would raise a brow or 2.
Kocklow!!!
awesome outlook bro.
anyone gets time, read the blog about the security taking me off the plane!</TD></TR></TABLE>
I read it earlier. I would imagine the equipment you lug around would raise a brow or 2.
Honda-Tech Member
Joined: Apr 2005
Posts: 1,454
Likes: 8
From: Portsmouth, Va, Usa
Re: (Si Jeff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Si Jeff »</TD></TR><TR><TD CLASS="quote">here are some specs.
B18C block, ITR Crank, Eagle rods, 81.5mm arias 12.0:1 pistons, ITR crank pulley, ARP crank bolt, ARP stud kit, Alaniz competition port ITR head, Rocket M22x cams, Complete Supertech valvetrain (flat face valve), toda cam gears, toda timing belt, AEBS IM, rc 440cc injectors, walbro fuel pump, bdl fuel rail, spoon plug wires, ITR throttle body bored to 65mm by maxbore.com, 3"intake with bpi stack, Rage race header, high flow cat, 2.5" kteller exhaust with vibrant muffler, P28 w/ hondata S200, Mugen thermostat and fan switch, hasport mounts, oem CTR lsd, acl race bearing, thrust washers. there's also a bunch other stuff such as the usual new pumps, gaskets, filters, etc. eventually will get s300, and ITB's. probably when i pick up a daily. </TD></TR></TABLE>
Jeff,
Where did you get your K-Teller piping? I'm thinking of getting 3' K-Teller with a vibrant. Let me know how it sounds, I hate raspy but love stock looking. (I'm turbo'd)
And where did you get your Mugen Fan Switch? TIA.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stunna BEN »</TD></TR><TR><TD CLASS="quote">Found some pictures of me shooting in Puerto Rico!!!
</TD></TR></TABLE>
Dope!
Where is that blog at? I looked on your site and couldn't find it.
Also, your about me is missing a TO between Ben and push
.
B18C block, ITR Crank, Eagle rods, 81.5mm arias 12.0:1 pistons, ITR crank pulley, ARP crank bolt, ARP stud kit, Alaniz competition port ITR head, Rocket M22x cams, Complete Supertech valvetrain (flat face valve), toda cam gears, toda timing belt, AEBS IM, rc 440cc injectors, walbro fuel pump, bdl fuel rail, spoon plug wires, ITR throttle body bored to 65mm by maxbore.com, 3"intake with bpi stack, Rage race header, high flow cat, 2.5" kteller exhaust with vibrant muffler, P28 w/ hondata S200, Mugen thermostat and fan switch, hasport mounts, oem CTR lsd, acl race bearing, thrust washers. there's also a bunch other stuff such as the usual new pumps, gaskets, filters, etc. eventually will get s300, and ITB's. probably when i pick up a daily. </TD></TR></TABLE>
Jeff,
Where did you get your K-Teller piping? I'm thinking of getting 3' K-Teller with a vibrant. Let me know how it sounds, I hate raspy but love stock looking. (I'm turbo'd)
And where did you get your Mugen Fan Switch? TIA.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stunna BEN »</TD></TR><TR><TD CLASS="quote">Found some pictures of me shooting in Puerto Rico!!!
</TD></TR></TABLE>Dope!
Where is that blog at? I looked on your site and couldn't find it.
Also, your about me is missing a TO between Ben and push
.
Don't call it a comeback
Joined: Oct 2001
Posts: 20,968
Likes: 0
From: Greenville SC
Re: (Redcoupe)
thanks for the correction.
i keep posting links too...
http://stunnaben.tumblr.com
you could see a spelling check, but you couldnt see that? wow!!!!
i keep posting links too...
http://stunnaben.tumblr.com
you could see a spelling check, but you couldnt see that? wow!!!!
Don't call it a comeback
Joined: Oct 2001
Posts: 20,968
Likes: 0
From: Greenville SC
Re: (Stunna BEN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIRIUS »</TD></TR><TR><TD CLASS="quote">Any money shots of that 'rolla?</TD></TR></TABLE>
maybe in the next few days, but cannot post much.
8.9, full street car, full interior.
maybe in the next few days, but cannot post much.
8.9, full street car, full interior.
B*a*n*n*e*d
Joined: Oct 2003
Posts: 13,235
Likes: 0
From: BAWLSTON
Re: (Stunna BEN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stunna BEN »</TD></TR><TR><TD CLASS="quote">
maybe in the next few days, but cannot post much.
8.9, full street car, full interior. </TD></TR></TABLE>
Sick
maybe in the next few days, but cannot post much.
8.9, full street car, full interior. </TD></TR></TABLE>
Sick
Honda-Tech Member
Joined: Mar 2005
Posts: 5,828
Likes: 0
From: Guam, USA
Re: (eg_junior)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg_junior »</TD></TR><TR><TD CLASS="quote">thats one bad *** toyota</TD></TR></TABLE>
ben, u gotta come down to Guam mang!!! we got lots of rollas just like that one
ben, u gotta come down to Guam mang!!! we got lots of rollas just like that one