The EF sQuad Thread
Honda-Tech Member
Joined: Nov 2002
Posts: 5,842
Likes: 0
From: Eastern, WA, USA
Re: (408wdy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy »</TD></TR><TR><TD CLASS="quote">wait until the car is presentable then add.. would be good imo</TD></TR></TABLE>
I say wait, also. I tried to get into the squad 2 previous times, and has not voted in. Untill my wagon look "presentable".
Hell at 1 point I had 3 EF's underconstution(hb,crx,wagon). With all of them just needing a good paint job,or wheels, and still could not get into the squad.
I say wait, also. I tried to get into the squad 2 previous times, and has not voted in. Untill my wagon look "presentable".
Hell at 1 point I had 3 EF's underconstution(hb,crx,wagon). With all of them just needing a good paint job,or wheels, and still could not get into the squad.
Rainman
Joined: Mar 2006
Posts: 6,979
Likes: 0
From: Kills, Utah
Re: (1989CivicSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1989CivicSi »</TD></TR><TR><TD CLASS="quote">Lol, props for keeping a positive attitude even through the fire 
</TD></TR></TABLE>
No kidding.....I would probably be out puching babies and kicking puppies....
</TD></TR></TABLE>No kidding.....I would probably be out puching babies and kicking puppies....
Junior Member
Joined: Sep 2006
Posts: 70
Likes: 0
From: Bartsow CA, Mesa AZ, SV AZ, United States
Re: (SIred91)
Trying to get in the Squad, followed the rules from page 1. check the link to the thread in the appearance/build section. Be gentle 
https://honda-tech.com/zerothread/2328280
https://honda-tech.com/zerothread/2328280
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: Mines (nuskoolty)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nuskoolty »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
more pictures would be nice
look @ first page for official rules
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by greenEFSI »</TD></TR><TR><TD CLASS="quote">update on the engine bay...
#64 </TD></TR></TABLE>
good start mang
watch out for this trouble some spot. I did the same thing with the Metal Filler on my car with a semi-shave and this has been the only spot for far that has cracked.
If u removed the sealer from that area I would add it back, unless you tig welded it.
Filler in some spots minus the sealer and no welding will just crack eventually
just a tip
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TomsEF »</TD></TR><TR><TD CLASS="quote">
#103
new pic, it sucks , but anyway just put the lip on yesterday! needs some adjustment with a heat gun and it will be perfect! missin the "H" i kno its on back order hopefully get it this week! wheels will also be ordered this week! </TD></TR></TABLE>
90-91 guys must be doing flips now that they have a "new" lip to use
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jfizzzle187 »</TD></TR><TR><TD CLASS="quote">Trying to get in the Squad, followed the rules from page 1. check the link to the thread in the appearance/build section. Be gentle
https://honda-tech.com/zerothread/2328280 </TD></TR></TABLE>
good start<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1989CivicSi »</TD></TR><TR><TD CLASS="quote">Lol, props for keeping a positive attitude even through the fire </TD></TR></TABLE>
x3
</TD></TR></TABLE>more pictures would be nice
look @ first page for official rules
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by greenEFSI »</TD></TR><TR><TD CLASS="quote">update on the engine bay...
#64 </TD></TR></TABLE>
good start mang
watch out for this trouble some spot. I did the same thing with the Metal Filler on my car with a semi-shave and this has been the only spot for far that has cracked.
If u removed the sealer from that area I would add it back, unless you tig welded it.
Filler in some spots minus the sealer and no welding will just crack eventually
just a tip
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TomsEF »</TD></TR><TR><TD CLASS="quote">
#103
new pic, it sucks , but anyway just put the lip on yesterday! needs some adjustment with a heat gun and it will be perfect! missin the "H" i kno its on back order hopefully get it this week! wheels will also be ordered this week! </TD></TR></TABLE>
90-91 guys must be doing flips now that they have a "new" lip to use
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jfizzzle187 »</TD></TR><TR><TD CLASS="quote">Trying to get in the Squad, followed the rules from page 1. check the link to the thread in the appearance/build section. Be gentle
https://honda-tech.com/zerothread/2328280 </TD></TR></TABLE>
good start<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1989CivicSi »</TD></TR><TR><TD CLASS="quote">Lol, props for keeping a positive attitude even through the fire
</TD></TR></TABLE>x3
B*a*n*n*e*d
Joined: Apr 2006
Posts: 3,116
Likes: 0
From: Northeast
Re: Mines (ef yu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ef yu »</TD></TR><TR><TD CLASS="quote">i would be wise about spending your lefted over cash. used cars always have suprises 
.
btw can my bucket get the #105? ill be goood
</TD></TR></TABLE>
Haha ive been in the EF game. I know what your talking about. =\
. btw can my bucket get the #105? ill be goood
</TD></TR></TABLE>Haha ive been in the EF game. I know what your talking about. =\
Honda-Tech Member
Joined: Apr 2005
Posts: 923
Likes: 0
From: Knoxville, TN, USA
Re: (SIred91)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIred91 »</TD></TR><TR><TD CLASS="quote">
No kidding.....I would probably be out puching babies and kicking puppies.... </TD></TR></TABLE>
hahahaha! ROFL!!!! thats horrible
No kidding.....I would probably be out puching babies and kicking puppies....
</TD></TR></TABLE>hahahaha! ROFL!!!!
thats horrible
Track Advocate
Joined: Jul 2005
Posts: 5,274
Likes: 1
From: DFW
Re: (PandaMan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PandaMan »</TD></TR><TR><TD CLASS="quote">
hahahaha! ROFL!!!! thats horrible</TD></TR></TABLE>
not really...that's what GTA is for, taking out aggravation...going to play paintball this saturday...going to make some people feel my pain
hahahaha! ROFL!!!!
thats horrible</TD></TR></TABLE>not really...that's what GTA is for, taking out aggravation...going to play paintball this saturday...going to make some people feel my pain
Honda-Tech Member
Joined: Nov 2002
Posts: 5,842
Likes: 0
From: Eastern, WA, USA
Re: (jdm_dc_fan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_dc_fan »</TD></TR><TR><TD CLASS="quote">chances are you wont get in the squad 
. i didnt make it and our cars are pretty much identical except im a little faster 
</TD></TR></TABLE>
you would of got my vote. Boosted CRX SI.
Just need some wheels for it.
BTW did you get rid of those white VX wheels to some kid from eastern,WA?
. i didnt make it and our cars are pretty much identical except im a little faster 
</TD></TR></TABLE> you would of got my vote. Boosted CRX SI. Just need some wheels for it.
BTW did you get rid of those white VX wheels to some kid from eastern,WA?
Honda-Tech Member
Joined: Dec 2006
Posts: 441
Likes: 0
From: ill be where im at, California, US
Re: Mines (vega_ROCKS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS »</TD></TR><TR><TD CLASS="quote">
good start mang
watch out for this trouble some spot. I did the same thing with the Metal Filler on my car with a semi-shave and this has been the only spot for far that has cracked.
If u removed the sealer from that area I would add it back, unless you tig welded it.
Filler in some spots minus the sealer and no welding will just crack eventually
just a tip
</TD></TR></TABLE>
yea the sealer was removed but i applied kitty hair and then metal glaze to fill in the kitty hair. about that area you circled im not sure if im just going to smooth it out or actually shave and blend it in...
good start mang
watch out for this trouble some spot. I did the same thing with the Metal Filler on my car with a semi-shave and this has been the only spot for far that has cracked.
If u removed the sealer from that area I would add it back, unless you tig welded it.
Filler in some spots minus the sealer and no welding will just crack eventually
just a tip
</TD></TR></TABLE>
yea the sealer was removed but i applied kitty hair and then metal glaze to fill in the kitty hair. about that area you circled im not sure if im just going to smooth it out or actually shave and blend it in...
Inactive account now known as MyspaceTom
Joined: Jan 2007
Posts: 0
Likes: 0
From: GA, USA
Re: (jfizzzle187)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS »</TD></TR><TR><TD CLASS="quote">90-91 guys must be doing flips now that they have a "new" lip to use </TD></TR></TABLE>
ya im surprised how well it fit. 5 black screws, dremel, and some heat
ya im surprised how well it fit. 5 black screws, dremel, and some heat
Honda-Tech Member
Joined: Jan 2006
Posts: 1,306
Likes: 0
From: Nashville, TN, USA
Re: (TomsEF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TomsEF »</TD></TR><TR><TD CLASS="quote">
ya im surprised how well it fit. 5 black screws, dremel, and some heat</TD></TR></TABLE>
glad u got in on there tom, i was gonna give u my number so u could call and ask any questions, but i totally forgot after i got those pictures posted for you, turned out good
i jus pulled my lip off today to repaint it, it started fading already
ya im surprised how well it fit. 5 black screws, dremel, and some heat
</TD></TR></TABLE>glad u got in on there tom, i was gonna give u my number so u could call and ask any questions, but i totally forgot after i got those pictures posted for you, turned out good
i jus pulled my lip off today to repaint it, it started fading already
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: Mines (greenEFSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by greenEFSI »</TD></TR><TR><TD CLASS="quote">
yea the sealer was removed but i applied kitty hair and then metal glaze to fill in the kitty hair. about that area you circled im not sure if im just going to smooth it out or actually shave and blend it in...</TD></TR></TABLE>
WHAT IS KITTY HAIR??
yea the sealer was removed but i applied kitty hair and then metal glaze to fill in the kitty hair. about that area you circled im not sure if im just going to smooth it out or actually shave and blend it in...</TD></TR></TABLE>
WHAT IS KITTY HAIR??
Honda-Tech Member
iTrader: (1)
Joined: Jan 2006
Posts: 2,654
Likes: 0
From: "That one guy with that one car" Kennewick WA
Re: (91' LS-VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91’ LS-VTEC »</TD></TR><TR><TD CLASS="quote">
you would of got my vote. Boosted CRX SI.
Just need some wheels for it.
BTW did you get rid of those white VX wheels to some kid from eastern,WA? </TD></TR></TABLE>
yeah sold them to some kid that lives in one of those towns in between tri-cities and yakima. threw the stock wheels back on and painted the IC black to keep the pigs away. i see your from E washington, you going to race wars?
you would of got my vote. Boosted CRX SI. Just need some wheels for it.
BTW did you get rid of those white VX wheels to some kid from eastern,WA? </TD></TR></TABLE>
yeah sold them to some kid that lives in one of those towns in between tri-cities and yakima. threw the stock wheels back on and painted the IC black to keep the pigs away. i see your from E washington, you going to race wars?
Honda-Tech Member
Joined: Mar 2005
Posts: 6,176
Likes: 0
From: san jo
Re: Mines (vega_ROCKS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS »</TD></TR><TR><TD CLASS="quote">
WHAT IS KITTY HAIR??
</TD></TR></TABLE>
hair that comes from a kitty duh....
it's like a body filler with fiberglass strands in it.. which i cant understand why it would be used in the bay.. because it's designed to be a backing/support a broken fiberglass piece. or to patch a hole but whatevs.
WHAT IS KITTY HAIR??
</TD></TR></TABLE>
hair that comes from a kitty duh....
it's like a body filler with fiberglass strands in it.. which i cant understand why it would be used in the bay.. because it's designed to be a backing/support a broken fiberglass piece. or to patch a hole but whatevs.
lol..
Honda-Tech Member
Joined: Dec 2006
Posts: 441
Likes: 0
From: ill be where im at, California, US
Re: Mines (ant$missShift)
KITTY HAIR � Best known for its bridging capabilities in rebuilding shattered fiberglass and reinforcing torn or rusted areas of sheet metal. Formulated with long strands of chopped fiberglass. DOUBLE THE STRENGTH OF STANDARD FILLERS. Waterproof. Rustproof. Can be used with or without fiberglass cloth or mat. Should be finished with body filler or polyester glazing putty. Blue cream hardener is included.
Inactive account now known as MyspaceTom
Joined: Jan 2007
Posts: 0
Likes: 0
From: GA, USA
Re: (iheartteal)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iheartteal »</TD></TR><TR><TD CLASS="quote">
glad u got in on there tom, i was gonna give u my number so u could call and ask any questions, but i totally forgot after i got those pictures posted for you, turned out good
i jus pulled my lip off today to repaint it, it started fading already</TD></TR></TABLE>
fadeing already? lame. i have a surplus of back to black, good stuff, so hopefully it will stay shiney for a while pm me ur # ill be at IA this year and movin to nash soon!
glad u got in on there tom, i was gonna give u my number so u could call and ask any questions, but i totally forgot after i got those pictures posted for you, turned out good
i jus pulled my lip off today to repaint it, it started fading already</TD></TR></TABLE>
fadeing already? lame. i have a surplus of back to black, good stuff, so hopefully it will stay shiney for a while
pm me ur # ill be at IA this year and movin to nash soon!
Honda-Tech Member
Joined: Mar 2005
Posts: 6,176
Likes: 0
From: san jo
Re: Mines (greenEFSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by greenEFSI »</TD></TR><TR><TD CLASS="quote">KITTY HAIR � Best known for its bridging capabilities in rebuilding shattered fiberglass and reinforcing torn or rusted areas of sheet metal. Formulated with long strands of chopped fiberglass. DOUBLE THE STRENGTH OF STANDARD FILLERS. Waterproof. Rustproof. Can be used with or without fiberglass cloth or mat. Should be finished with body filler or polyester glazing putty. Blue cream hardener is included.</TD></TR></TABLE> u copy and pasted that whole script from somewhere right.. lol