ok running into a lil prob..... my friend has a 98 civic coupe and is trying to put the b16 from the eg2 into it which is obd1..... anyone know a write up on this or where i can find what i need to do to a wiring harness or where i can get a new one or what i need in general

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sucat &raquo;</TD></TR><TR><TD CLASS="quote">ok running into a lil prob..... my friend has a 98 civic coupe and is trying to put the b16 from the eg2 into it which is obd1..... anyone know a write up on this or where i can find what i need to do to a wiring harness or where i can get a new one or what i need in general</TD></TR></TABLE>

lucky you get a free clip

ill take the sidemarkers if there oem

HEY JaMES LMK ON THAT WRITE UP or w/e

 

http://www.hondamarketplace.co...80313 would this work or would i need something else also???? i have never done a wire swap before

 

well i'm finally pretty much done with my interior... just some seats perhaps... but legit seats are so friggin expensive and i dont want to cheap on the seats...





oh and i got the mudflaps on today... they look excellent (thank you skip.two)... but i had a minor issue (dont read further if you are busy)

so i put the mudflaps on and one of the front screws was slightly loose and jiggly but was in pretty good. well i was like man i hope that doesnt come out.

anyway, drove 30 minutes home and got out to get the mail... all screws still in... sweet...

drive 100 feet to a speed bump that i go over EVERYDAY... gah i hate that thing, and then after the speed bump i hear that awesome tick tick tick tick tick as i roll... so i park and damned if there isnt an effing screw in my BRAND NEW s-drives... but i backed it out and its all good, but that was my DDD moment for the week.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dirty Octopus &raquo;</TD></TR><TR><TD CLASS="quote">
PM clean sol </TD></TR></TABLE>

yeah thats a nogo on a center console... i have:

door panels (no speaker grillz 7/10 condition)
under steering column dash piece (9/10)
dc 4-2-1 ceramic header (8/10... used and dirty but perfect mechanically)
rear speaker panels (grey 8.5/10)
94+ glove box (8.5/10)
factory shift **** (8/10...faded a bit)

PM me if anyone wants anything. we'll work out a pretty good deal as i've had all that stuff for quite some time now.


EDIT:: WTF!! NO ONE IS ON THIS EVENING!!!


Modified by clean_sol at 6:17 PM 5/21/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sucat &raquo;</TD></TR><TR><TD CLASS="quote">look what was left in the middle of my yard today

for sale </TD></TR></TABLE>

bet you'd have a few takers for that!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dirty Octopus &raquo;</TD></TR><TR><TD CLASS="quote">okay you's guys...

this may be my next wheel. </TD></TR></TABLE>

damn man, trying to catch up with miko as a wheel *****??

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by imm0rt41 &raquo;</TD></TR><TR><TD CLASS="quote">So seeing those pics of the front clip up there have kinda made me want to sell the motor and tranny i have (OBD0 JDM B16A + EM1 tranny with 0 miles after rebuild) and save a bit to get a front clip. Would have all of the parts I want in one shipment for one price, so I could save a bit over doing this part by part bullshit. Any thoughts?</TD></TR></TABLE>

DO ET! DO IT!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dirty Octopus &raquo;</TD></TR><TR><TD CLASS="quote">damn im black...

first pink flake
now lay-a-way </TD></TR></TABLE>

haha but wheres the watermelon


Modified by memphisraines26 at 11:09 PM 5/21/2008

 

Dsoc, need your help... its back up for sale to get a sol

http://www.hondamarketplace.co...05036

 

anybody got an a/c system for a 97 vtec? my mom's complaining about how hot it is in her sol

 

didn't want to have to be the one to say it but....

just tell her to take her top off

 

good stuff guys

i have a ton of stuff 2 do this weekend, last week i bought my bro a 95 si that was originally frost white, but then painted ugly teal with checkers and now im in the process of prepping it and 2 morow im g2 repaint the whole beast champ white.

my sol is g2 have a ton of stuff done 2 it this weekend, sat im pickin up a 98 ex trans and a 97 accord throttle body, both for 50 bucks. i just got my sidemarkers 2day and my antenna block off plate. got a del sol vtec strut bar, going 2 paint my blades time attack, and im g2 do the y8 intake manifold on my y7.

sounds like it will be a good memorial day for me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by memphisraines26 &raquo;</TD></TR><TR><TD CLASS="quote">
haha but wheres the watermelon
</TD></TR></TABLE>
oh ****! i almost choked on a seed i laughed so hard!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dirty Octopus &raquo;</TD></TR><TR><TD CLASS="quote">
oh ****! i almost choked on a seed i laughed so hard! </TD></TR></TABLE>

haha it was a poke in all good fun. from just an ol southern boy myself. cant wait for IA and get some good BBQ while i'm back down.

now which wheels will I roll down on?

may just say eff it and get some falken ziex for the MR5s to throw on

 

Now you've got those MR5's, unbolt them and get those lips redone pronto

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by memphisraines26 &raquo;</TD></TR><TR><TD CLASS="quote">

haha it was a poke in all good fun. from just an ol southern boy myself. cant wait for IA and get some good BBQ while i'm back down.

now which wheels will I roll down on?

may just say eff it and get some falken ziex for the MR5s to throw on </TD></TR></TABLE>
sall good bro! i used the blink cuz i was too lazy to find a smiley that fit what i wanted to express.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by memphisraines26 &raquo;</TD></TR><TR><TD CLASS="quote">

now which wheels will I roll down on?
</TD></TR></TABLE>
im in the same predicament lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Berman &raquo;</TD></TR><TR><TD CLASS="quote">Now you've got those MR5's, unbolt them and get those lips redone pronto </TD></TR></TABLE>

one more day of work then i can spend a day on the rims!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohc95vtec-t &raquo;</TD></TR><TR><TD CLASS="quote">
im in the same predicament lol </TD></TR></TABLE>

i need a transtop rear clip to make a sol trailer to bring it all down with me lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohc95vtec-t &raquo;</TD></TR><TR><TD CLASS="quote">
im in the same predicament lol </TD></TR></TABLE>

Same, six sets is tuff an' I want mooar lol

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by memphisraines26 &raquo;</TD></TR><TR><TD CLASS="quote">

one more day of work then i can spend a day on the rims!
i need a transtop rear clip to make a sol trailer to bring it all down with me lol</TD></TR></TABLE>

One day?! even giving mine a scrub up is taking me more than a day!
Lol have you SEEN the boot of transtop? just enough room for a packet of twinkies You happy with them wheels bro?

 

here some pics from a local member that went to eibach

 

that black sol

 

wow.. eibach passed already? f*cking school kept my mind busy.. oh well

 

i like that black sol with mugen wheels

hi wray wray hi awwwsker

 

hiiiiii vyyyyy!

yea, that black sol looks clean, back end needs to come down some though

 

pm'd u vy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sucat &raquo;</TD></TR><TR><TD CLASS="quote">ok running into a lil prob..... my friend has a 98 civic coupe and is trying to put the b16 from the eg2 into it which is obd1..... anyone know a write up on this or where i can find what i need to do to a wiring harness or where i can get a new one or what i need in general</TD></TR></TABLE>



RYWIRE &gt; http://www.rywire.com


http://i35.photobucket.com/alb...9.jpg

Is that the Mugen Racing I?

I &lt;3 my Racing III

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mugen-k &raquo;</TD></TR><TR><TD CLASS="quote">pm'd u vy </TD></TR></TABLE>

FINALLY