Afternoon ******.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nix94delsol &raquo;</TD></TR><TR><TD CLASS="quote">where can you get bronze paint?</TD></TR></TABLE>
For wheels? Auto parts stores
I used duplicolor, a pic of the wheels I painted is in the painted stock wheels thread page 2 I think

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ehhhdc2 &raquo;</TD></TR><TR><TD CLASS="quote">anyone here still have stock axles? i'm thinking of replacing mine, any recommendation?</TD></TR></TABLE>
just get some from autozone/napa/advanced

free lifetime replacement

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by afro sheen &raquo;</TD></TR><TR><TD CLASS="quote">

you could always come pick up my carbon fiber bonnet </TD></TR></TABLE>

bonnet = hood?

 

I was just looking thru the 95 del sol broschure thing and just noticed where most of the pics were taken.. Mission beach in sd. Lol I knew it was familiar

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KhanhCord &raquo;</TD></TR><TR><TD CLASS="quote">bonnet = hood?</TD></TR></TABLE>
Yes

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohc95vtec-t &raquo;</TD></TR><TR><TD CLASS="quote">
just get some from autozone/napa/advanced

free lifetime replacement </TD></TR></TABLE>

how well do they hold up?

 

like ****. all the remans I've ever seen from any of the parts stores have been pieces of ****. half of them you cant even move the joints.

 

ehh you must just have bad luck with them, or just get new ones from them? i have them, there holding fine.. my buddy with a ~500ish+ whp integra has them (running slicks) and doesnt have any problems, everyone ive ever talked to that uses them has no problems, but if they do snap, take em back, and get a new one FREE!

 

Old pic

 

goodnight everyone

 

sooo i needa paint my winter wheels (si) hmmmm.... we'll see what i can come up with.

 

friggin rediculous....
User Posts
del_barry 3103
james p. 3101
broketuner-Sol_Si 3071
skip.two 2963
solbrothers 2902

im leaving to go get a life

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by memphisraines26 &raquo;</TD></TR><TR><TD CLASS="quote">
it's not like the time i saw a mazda with honda hubcaps
</TD></TR></TABLE>

ha. try an old mazda protege rollin on 04 EX wheels. with honda centercaps

 

there was an old mazda at my old apartments with honda hubcaps lol

 

research papers suck

procrastinating til two days before its due is even worse

 

Rear garnish w/ jdm rear fillers for 150 + shipping anyone?

I need money to pay off my new parts

 

lip

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by solbrothers &raquo;</TD></TR><TR><TD CLASS="quote">so the insurance adjuster looked at the car. ... and wrote my brother a check for $1200 .

and that's JUST for the bodywork/paint (which is going to be repaired and repainted by my brother ).

there's some steering issue still though . so, we're taking it to get aligned, and see what happens. the insurance said they'd pay for any suspension repairs too </TD></TR></TABLE>
good stuff, i kinda want someone to hit my car so i can get new panels lol

 

wow matt, most insurance would probably say 1200 for the whole car lol.

any takes on the Hawk HPS brake pads? dusting, braking, etc?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by memphisraines26 &raquo;</TD></TR><TR><TD CLASS="quote">any takes on the Hawk HPS brake pads? dusting, braking, etc?</TD></TR></TABLE>

pretty minimal dust, but braking is only so so. better than stock though, for sure. nowhere near blues though, but also not even 1/4 the dust that blues make

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WrongWD &raquo;</TD></TR><TR><TD CLASS="quote">pretty minimal dust, but braking is only so so. better than stock though, for sure. nowhere near blues though, but also not even 1/4 the dust that blues make</TD></TR></TABLE>

well it will be for a daily, so dust is one concern at the moment compared to swapping over to a race pad. what other suggestion over oem that is low dusting and better braking?

 

yay.. i get my oem wheels back tomorrow

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by memphisraines26 &raquo;</TD></TR><TR><TD CLASS="quote">

well it will be for a daily, so dust is one concern at the moment compared to swapping over to a race pad. what other suggestion over oem that is low dusting and better braking?</TD></TR></TABLE>

HP+ is a good pad for street

 

Jesus ******* Christ. After a FULL day of angle gridning, drilling bolts out, reeplacing **** with OEM parts and breaking them again, 90% of my suspension is on -.-


Waiting on new LCAs and such for rear (over night here by noon tomorrow)

This 3-4 hour project has turned into a 4 day project, with about another $600 invested in replacement parts