man, how do you not have camber?? you're the only person i know of that has a lowered da with no camber! seriously, when i still had stock suspension on mine, both of my front springs had a coil broken off of them (but were still sitting there under the spring) and i had camber wear. now that i have lowered my car, its horrible! i finally got my camber kit on last week and i have an appointment for an alignment on monday finally. can wait to finally have my front end back in check where its supposed to be for once!!

 

haha dont worry man im not trying to hate. tint is just not my style. but hey its not my car. but like i said its fresh. you sold the d2's?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18IntegraLS &raquo;</TD></TR><TR><TD CLASS="quote">I was gonna sand down my front bumper down because the top of the bumper started to peel and now its bad. so what grit do u guys recommend?

I was gonna spray it black after primered cuz my car is a dark red, and also sand and primer the hood and paint it black as well.

Tell me what u guys think thanks. </TD></TR></TABLE>

And one of these days, I'm going to sand down my rear OEM non-LED wing, paint and install it.

 

i wasnt saying i dont get camber, you can see by my pics that my rims are cambered in, i just dont know why i dont get uneven wear on my tires, if i do its very minimal. my friend with an eg, his car doesnt eat tires either, and its slammed to the floor

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OldSkoolDa91 &raquo;</TD></TR><TR><TD CLASS="quote">man, how do you not have camber?? you're the only person i know of that has a lowered da with no camber! seriously, when i still had stock suspension on mine, both of my front springs had a coil broken off of them (but were still sitting there under the spring) and i had camber wear. now that i have lowered my car, its horrible! i finally got my camber kit on last week and i have an appointment for an alignment on monday finally. can wait to finally have my front end back in check where its supposed to be for once!!</TD></TR></TABLE>

My stock DB2 had stock front camber kit but I replaced it with the brand new pro series sk2 front camber kit. But I still have some camber issue as the car lowers more


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by duzyxfresh &raquo;</TD></TR><TR><TD CLASS="quote">haha dont worry man im not trying to hate. tint is just not my style. but hey its not my car. but like i said its fresh. you sold the d2's?</TD></TR></TABLE>


Still got the D2, wheres your DA at

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dumada9 &raquo;</TD></TR><TR><TD CLASS="quote">yeah man, dont remove the tint, i wouldnt remove something that actually serves a purpose. im debating on tinting my rear 3 windows too just cause its soo damn hot in the car. from my experience, my da is pretty low, basically tucking tires, and i dont get camber wear on the tires. clean da, one of the cleanest gsr's i've seen
</TD></TR></TABLE>

ya tint saves car from heat

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dumada9 &raquo;</TD></TR><TR><TD CLASS="quote">i wasnt saying i dont get camber, you can see by my pics that my rims are cambered in, i just dont know why i dont get uneven wear on my tires, if i do its very minimal. my friend with an eg, his car doesnt eat tires either, and its slammed to the floor</TD></TR></TABLE>

what kind of tires are you guys using? wish i could have camber but no uneven wear on my tires! i've had a slammed crx and eg hatch b4 and didnt have bad wear on tires, but my da just eats them like they're goin out of style

 

lol wasnt really sad i had fun lol il post pics up and a video my friend took of me stabbing a b16 hatch on the last run i broke my Diff off the line so no more LS tranny should get the b16 lsd tranny in next week or so when i have time


best run was a 14.5 spinning all of first and i never got out of third DAMN LS TRANNY lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dumada9 &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>

ooohhhh so sexy

 

thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lazychynksta &raquo;</TD></TR><TR><TD CLASS="quote">
Still got the D2, wheres your DA at</TD></TR></TABLE>

its just chillin in my garage. i finally got a black da which i always wanted but it has a little body damage so gotta fix that.

 

did u cut out ur own holes for the sidemarkers?

 

what size are your slips???

 

HAPPY FATHERS DAY tomorrow to all you fellow fathers in the squad!!

 

I'm in the middle of removing my power steering because my line is leaking and i need to know what can i remove that has to do with the power steering?

 

honestly herb, i just took my belt off and left everything else attached...but, you can take off the pump itself, the belt, the hard line that loops across the front, the res. and then just make a loop to close the circuit and just to make sure you keep fluid in the rack...if you need me to, i can take a pic of how i looped mine...

 

my girlfriends brother cut the holes for my sidemarks and did it perfect, its tight in there . the slips are 16's in the back and 15's in the front, i got them for free so cant really complain haha

 

16's in the back and 15's in the front thats pretty wierd but aye can't complain u did get it for free whish i could get that deal well im gettin a pair of slips 15 and i got a pair of fat fives for free im pretty happy with them but yeah ur gf's bro seems to be good at body wrk

 

hey does anyone know of a good website to get a radiator? im thinking about getting Koyo or Fluidyne, but i cant seem to find a place that sells them for a 92.. I guess im looking to spend around $350, or thats where my research has taken me...

I just changed the hoses and the next day my car was overheating. when i was looking for a leak, I noticed that the part where the top hose connects to the radiator was just off completely, so the radiator was just spraying coolant all over the engine..It sucked trying to get it back to my house. It took me 2.5 hrs to get 30 miles

 

I promise to post more on the thread...just been so darn busy!

Andy...i miss you

Herb...Sonic was awesome...im gonna go back to Harry's this weekend to see if my **** is still there...if not thats ok...just wish i had the money to buy the freakin dashboard...sorry i didnt call or text...i was mad beat

Anyone wanna try to get together this weekend? Maybe make a short trip to Sonic in Limerick (for all of you people in the Philadelphia region)...PM me or talk on here

PAYCE

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90IntegraTuner &raquo;</TD></TR><TR><TD CLASS="quote">Andy...i miss you</TD></TR></TABLE>

ha! i knew you were gay! [freak]in flamer!!! lol. i've been wondering where your *** has been lately...

quick update for me...my act clutch/pressure plate came 2 days ago, getting an alignment tomorrow and then shopping for 2 new tires, then gotta order my urethane mounts. can't wait to get it all done! its been needing this love for quite a while now...

 

by the way...anyone want to buy a dirt bike after i fix it???

 

yeah man my girlfriends brother is good at everything, hahaa. he does his own body work, motor work, and everything else with his car

 

whoring some pics after the EF meet at Griffith Park...had no love from them with any pics....oh well it was their day.

*

*

*



Modified by DA9_DAD at 1:02 AM 6/16/2008