Here today to tell you about Boostflow's economical, but still very capable and infamous Ramhorn turbo manifold.

- We are offering these up in both D and B series application in either T3 or T4 open flange.
- Two bolt or Vband wastegate flange.
- Additional $75.00 for dumptube
- Additional $350.00 for 3” downpipe.
- Manifold/downpipe/dumptube combo available for $899.00+shipping(Please PM for further info)



-Fully ported low-angle merge collector allows for the optimal flow of exhaust gases from runners into a turbo exhaust housing.

-Fully TIG Welded and Back purged

-Each manifold is TIG welded by hand and back purged.

-We use 1/2" Mild Steel head plates and turbo flanges to protect against any warping or cracking.
-304L Stainless Steel Schedule 40(304L Stainless Steel piping will not crack under high boost and heavy load.)
-Tear drop wastegate runner for Tial MVS 40/44 and compgate 40/45 available.







Any further information, questions, requests, etc Please feel free to call/email/PM. In-house custom fabrication is available to those who are local to Arizona or willing to bring the vehicle to us!

Thanks for your time,
Rhett

 

looks nice is anyone running this setup? any likes and dislikes?

 

Hello and thanks for the bump!
I'm currently working on starting a feedback thread to get some of our past/current customers to post pictures and their overall thoughts on the products. We are going to also go back, get in contact with past buyers and get their opinions to post on forums and our site. In process to make all of these easier, faster and more pleasurable all around. Stay tuned!
Lastly, I'm putting together your price/options as we speak!
Thanks again,
Rhett

 

Man I can already feel this being a great experience and I didn't even buy yet!

Bump for a great guy who stands behind his product!!

 

Works with AC PS?

 

bump will vouch for them all day, awaiting my manifold now and i will post a review after tuning

 

Dwayne(hope I got that right),
Thanks a ton sir, I'm making a big effort to make the entire process painless and super enjoyable! Talk to you soon.
Unfortunately, neither work with a ramhorn setup as this, it may be possible to retain them with a tucked radiator and custom lines, if this is something you need to do, I can put you in contact with the right people.
Thanks and lmk.
Thanks a lot, Mark!
Your order was taken on before my presence here at the shop, would you mind posting what it is you have, expected goals and then actual numbers/results you achieve?

Keep the questions and orders coming folks! Also remember, any turbo components needed from Turbosmart, Precision and/or ID are readily available! Just PM/call for more info!


Rhett
602 358 9412

 

got my order started....woohoo! thanks rhett for all the answers

 

Bone Stock GSR
Skunk2 Manifold
70mm Tb
Greddy Intercooler
Boostflow Ramhorn
44mm TiAL gate
GT3076R 12 psi max
Full 3in exhaust no cat

expecting between 330-380 at 12psi
so well see what she makes

Rhett do you have a tracking number for my order by chance? manifold w 44mm dump pipe

 

84.5mm gsr
victor x manifold
boostflow ramhorn
44mm tial gate vband
garrett t04z
70mm throttle body
wanna make 550 without going over 25lbs

 

What's dump tube and what's the advantage of having it?

 

dump tube connects to your wastegate and runs the exhaust gases away from your engine components

 

It is no problem at all, my pleasure sir!
Mark, I'm looking into this for you currently, I will get back to you within 24-48 hours! Thanks for bearing with me!

PJD,
Looks like Bulk2k4 answered your question, that is exactly right, tones down and redirects the WG's noise as well. Open gates can be very loud!


Thanks everybody, keep the questions/PM's coming, lets get some more orders going! Will have some updated pictures as of tomorrow!

-Rhett

 

have some pictures for me too rhett :-)

 

Ok lmk as soon as possible thanks

 

i can give up my ac but i want to keep my ps make it happen some day for ac and ps i will jump on it... or just ps thxx

 

you dont need ps you cant even tell when u remove it

 

do you make these for a bottom mount turbo set up with the external wastegate on the side?

 

Thanks everybody, I will keep you updated best I can. Pics will be taken tonight and uploaded/posted by tomorrow afternoon!


That is essentially what this, if its twin scroll, its a bit different. PM if you'd like to discuss options!

Thanks,
Rhett

 

times must really be hard i would think there would be a billion people on this post....

 

Thanks again sir!
All PM's will be answered by end of business day, working out all quotes/pricing at the moment.
Keep em coming!

 

Can I get an update on my setup?

 

Update pm'ed...We now have the flanges and are building your setup as we speak.

 

Thanks Glen!
All PM's answered!

 

Youve caught my interest. Im gonna move some money around and im gonna contact you about purchasing one within the week.