i'm building a motor and am courious how high i could rev this motor and still be a little on the safe side. heres my set up:
B18a1 GE sleeved block bored to 85mm
Eagle H-Beam Rods with Wiseco 9:1c/r 85mm coated pistons with new rings
97 LS head with crower full valvetrain with crower 402t cams with JG intake mani
Spoolin Performance Ramhorn/full race style manifold with GT35R .60a/r compressor side and .82 hot side. tial wastegate and tial bov

 

I personally wouldn't take it past 9,000rpm.