what do you think
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: KC MO, MO, US
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
what do you think
OK short and to the point on 10psi I made 318hp and 220tq on 15 to 18psi I only made 338hp and 255tq. A/F was about 12 to 12.5 it got a little higher on the height boost runs almost to 13 because of the DSM450 and it creeping to 18psi 750 are on the way.
My question is shouldn't I be making a little more then 20hp and 35tq on top of the 318 and 220 with 15psi?
Setup
Fully build bottom end sleeved, rods, and pistons
Ported head
Skunk manifold
bbk 70mm tb
450dsm injectors
Zdyne Gold ecu
Drag manifold
t3t4 turbo
Half a drag down pipe
3in all the way back
Drag intercooler
If there is any other info you need just ask
My question is shouldn't I be making a little more then 20hp and 35tq on top of the 318 and 220 with 15psi?
Setup
Fully build bottom end sleeved, rods, and pistons
Ported head
Skunk manifold
bbk 70mm tb
450dsm injectors
Zdyne Gold ecu
Drag manifold
t3t4 turbo
Half a drag down pipe
3in all the way back
Drag intercooler
If there is any other info you need just ask
Thread
Thread Starter
Forum
Replies
Last Post
Boosted96EK
Forced Induction
1
02-14-2005 08:35 AM