ok i have the major peices i am just wondering what else i need to put my turbo kit onto my car the list is all what i have

-AFI 304ss Tubular Ramhorn Manifold
-AFI 3" Stainless Downpipe w/ braided flex and O2 bung
-AFI Stainless DIY dumptube kit
-AFI 26x6.5.3.5 Garrett Core Backdoor Front mount Intercooler
-AFI 2.5'" Powder Coated Charge Piping Kit, Bead Rolled
-AFI Street oil line kit (AN fittings, Braided line)
-Garrett T3/T04e 57 trim
-Tial 38mm MVS V-Band Wastegate
-Tial 50mm Q Blow-Off Valve
-PWR 4-Ply silicone couplers
-Strong T-Bolt Clamps
-All miscellaneous gaskets and hardware
-cp pistons/ eagle rods
-rc injectors
-hondata s300
-walbro 255 fuel pump


ok now i am wondering what else do i need to do my kit im not sleeving the block and not touching the head yet so if anyone could please help me out it would be greatly appreciated thanks guys

 

Ecu?
Suspension/stiff mounts/Brakes? It's important to put the power to the ground and even more important to STOP.
A couple of guages (perhaps boost and oil pres)?
Vacuum hose?
Tapped oil pan or moroso type pan?

Too early to think right now........... -_-

 

What he said... Minus the suspension and brakes stuff...

 

yea i have all the mounts the suspension and all that already on the car and i have a hondata s300 im just wondering for the motor is pistons and rods good enought for a street car? nothing to big just a daily driver conservative tune. all i need is the motor list for the parts thanks for the input tho guys keep them comming

 

I never understood this part of the forum. People on tracks making half the power that this forum does and they never seem to address the 2 most important parts of a 400whp setup. BRAKES & SUSPENSION. What good is doing all that power, if you can't stop?

My point is. Everything that was mentioned, INCLUDING suspension and Brakes, should be addressed.

 

Amen Mac, preach on brotha!

 

3 bar map? good ems and dyno, dyno ,dyno!

 

Slicks. possibly a vaccum block. boost controller. head studs. guages. and a chicken sandwhich

 

helmet!!!, i forgot that when i went drag racing and they wouldnt let me run since it passed 13.5 and LOL on the chicken sandwhich

 

brakes???? pshhhttt, who needs to stop

There is always gonna be somthing that is over looked and forgotten, but it looks like most of it is there. Beer is always nice to have for when the job is done. I never recommend it during the job. Ive seen several stupid and expensive mistakes involving beer and forgetting to tighten something down.

 

ok yea i have the brakes and all that like i said mounts and axles are hasports and the brakes are some mugen active gates off of jhpusa, the suspension is some tein supers with edfc 24 mm sways all that asr **** camber everything just wondering if that MOTOR **** i listed is good running on some toyo proxes r888 and slicks at the track obvisly