How much is it? Where can i get it? Who will chip my ecu? Where can i read about it?

 

https://honda-tech.com/zerothread?id=626171
here is a nice 30+ page thread on uberdata. the software is free, but you need a chip burner and other stuff that i dont know at this moment. the chipping of the ecu is to be done by you or a friend perhaps(keepin with the whole diy thing). i too would like to know more about it. do some searches and check out the website(which should be listed somewhere in that thread as like unofficial uberdata webpage)or something close to that.

 

http://www.ecimulti.org/uberdata/

I am using uberdata right now.

 

beerbongs- your setup and results are making me wanna use uberdata real bad. that basemap you got seems like it was almost perfect. if i do get it, i def wanna talk to you about stuff. i plan on running the same turbo and intercooler as you too- your dyno session was sweet shizzy

 

BBKA, are you ready to hold the responsibility of being the official uberdata guru. hehehehe

If you guys have questions, go to http://www.ecimulti.org/uberdata. there is a forum and ask any question you want. we dont want bbka to get tired out and/or waste his genius on simple minded questions

 

überdata

as soon as I switch to a socketed p28 and play with the burner a bit more... I am going to be running it for sure.

download a copy, read the faq, and check it out.

 

My friend Dave is the one who made the basemap, socketed my ECU, and tuned my car... I am learning pretty fast though.

 

thats good pat, I remeber hearing about dave(leed) doing the **** for you.

Nick

 

there are numerous huge threads on it.

 

does anybody offer a service to do the modifications to the ECU? I'm not to comfortable soddering my ECU...

 

Its not hard to do. If you dont want to solder your ECU I'll offer my services as will alot of others on here. PM me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WakeSpliter &raquo;</TD></TR><TR><TD CLASS="quote">does anybody offer a service to do the modifications to the ECU? I'm not to comfortable soddering my ECU...</TD></TR></TABLE>

If I did it and the car still runs, you can do it too Buy a 2nd ECU, work on it slowly, test it out, and then sell your current unmodded ECU. That's what I did.

 

I have an uberchip socketed on an ecu for sale.
My car was stolen so no need for it.
It is a 0bd1 ecu with uberchip.
It has the setting to be used on a gsr engine
Selling it....

Anyone interested Just IM me on here or AIM lanlan14

 

does this work on the B16 I didnt see anything for it just the d-series vtec and non vtec and GSR and LS integs. I guess I would just switch to a GSR ECU.ehh

 

You can run a B16 with Uberdata

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mitch83 &raquo;</TD></TR><TR><TD CLASS="quote">does this work on the B16 I didnt see anything for it just the d-series vtec and non vtec and GSR and LS integs. I guess I would just switch to a GSR ECU.ehh</TD></TR></TABLE>

I'm running a B16 with a P28 ECU and Uberdata. The ECU you get doesn't really matter unless you need spiffy stuff like IAB support or knock sensor support. I have neither.

 

very coo.thanks brother
mitch

 

UBERDATA worked for me

 

just downloaded my version of uberdata and ma learing it quickly. pretty straigh forward.

 

has anyone used uberdata wiith a romulator?? do you see the changes instanly??
is it worth the $?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reaction360 &raquo;</TD></TR><TR><TD CLASS="quote">UBERDATA worked for me </TD></TR></TABLE>

damn dude on your dyno chart getting really lean up top.

 

Uberdata worked for me to

 

The statment "uberdata worked for me" makes it sound like hooked on phonics.

"Hooked on phonics worked for me!@%"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1bar &raquo;</TD></TR><TR><TD CLASS="quote">

damn dude on your dyno chart getting really lean up top.</TD></TR></TABLE>

haha yeah i know. i was running a base map another member made for me, we'll be doing a wideband tune in the next couple weeks here shortly and will take it back to the dyno.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MadCow &raquo;</TD></TR><TR><TD CLASS="quote">The statment "uberdata worked for me" makes it sound like hooked on phonics.

"Hooked on phonics worked for me!@%"</TD></TR></TABLE>

haha... hmm..you don't say?