Turbo manifold
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: Linden, N.J., USA
Posts: 751
Likes: 0
Received 0 Likes
on
0 Posts
Turbo manifold
What up guys I need to rebuild my turbo GSR motor but that's not in relation. Problem is I'm sending this turbo out to be rebuilt. I will be putting in a 2000 d16y8 and I have a turbo manifold for a single cam that uses the same t3/t4 flange.
I ran into some kid selling me a stock 91 dsm turbo with the ported o2 housing from his car because he already upgraded to a 20g . Will this turbo bolt up to the manifold or will I need an adapter flange? any answers greatly appreciated. Oh and by the way he lives like 90 min from me and I dont wanna make him drive down for no reason. he only wants 100 dollars and he guaranteed me it has no shaft play.
I ran into some kid selling me a stock 91 dsm turbo with the ported o2 housing from his car because he already upgraded to a 20g . Will this turbo bolt up to the manifold or will I need an adapter flange? any answers greatly appreciated. Oh and by the way he lives like 90 min from me and I dont wanna make him drive down for no reason. he only wants 100 dollars and he guaranteed me it has no shaft play.
Thread
Thread Starter
Forum
Replies
Last Post