Think this will make car fast?
#1
Thread Starter
Join Date: Oct 2003
Location: Northern, PA, USA
Posts: 1,454
Likes: 0
Received 0 Likes
on
0 Posts
Think this will make car fast? *Updated*
Well it is official. The exhaust is on and is literally half as loud as my tanabe racing medallion. Went from a 2.5" high flow cat to a 3" also. Nice deep tone but not loud at all! Turbo spools at much lower rpm's also! On the highway it used to drone and my ears would ring by the time i got anywhere. Thermal is so quiet I love it! My only concern is that it will burn out and become loud. It is brand new.
Hehhehehe I just had to post it! Sorry. It is SO nice. Thermal quality is definately top notch. Getting installed tomorrow and off to the dyno Saturday!
Modified by RedTegLS at 11:19 PM 1/13/2004
Modified by RedTegLS at 8:19 AM 1/14/2004
Hehhehehe I just had to post it! Sorry. It is SO nice. Thermal quality is definately top notch. Getting installed tomorrow and off to the dyno Saturday!
Modified by RedTegLS at 11:19 PM 1/13/2004
Modified by RedTegLS at 8:19 AM 1/14/2004
#2
Honda-Tech Member
Join Date: Mar 2002
Location: Arlington, VA
Posts: 1,210
Likes: 0
Received 0 Likes
on
0 Posts
Re: Think this will make car fast? (RedTegLS)
I've got one of them dilly's on my car; they're nice but loud. Did you get it with the silenced muffler or standard?
#3
O.G. triple O.G.
Re: Think this will make car fast? (RedTegLS)
Nice exhaust system...... Too bad you paid over $500 for yours..while I paid $150 for mine ( 3" Dynomax round muffler w/ 3" custom-bent piping ).
#4
Honda-Tech Member
Re: Think this will make car fast? (NVturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NVturbo »</TD></TR><TR><TD CLASS="quote">Nice exhaust system...... Too bad you paid over $500 for yours..while I paid $150 for mine ( 3" Dynomax round muffler w/ 3" custom-bent piping ). </TD></TR></TABLE>
but ittss sooo shiinyy!!!!
but ittss sooo shiinyy!!!!
#5
Honda-Tech Member
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,417
Likes: 0
Received 0 Likes
on
0 Posts
Re: Think this will make car fast? (NVturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NVturbo »</TD></TR><TR><TD CLASS="quote">Nice exhaust system...... Too bad you paid over $500 for yours..while I paid $150 for mine ( 3" Dynomax round muffler w/ 3" custom-bent piping ). </TD></TR></TABLE>
Real men run 15" of 3" downpipe and nothing more. If you must buy an exhaust, a Thermal R&D is made - quite unlike yours - with the highest quality stainless and a warranty. My friend Dave polished the 2 y/old one on his gf's car last weekend and all the soot and dirt and roadshit came right off without any real effort, and the exhaust is still flawless and without blemish.
yup, edited.
Real men run 15" of 3" downpipe and nothing more. If you must buy an exhaust, a Thermal R&D is made - quite unlike yours - with the highest quality stainless and a warranty. My friend Dave polished the 2 y/old one on his gf's car last weekend and all the soot and dirt and roadshit came right off without any real effort, and the exhaust is still flawless and without blemish.
yup, edited.
#6
Honda-Tech Member
Re: Think this will make car fast? (NVturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NVturbo »</TD></TR><TR><TD CLASS="quote">w/ 3" custom-bent piping </TD></TR></TABLE>
Custom = Crush bent.
Custom = Crush bent.
Trending Topics
#8
Honda-Tech Member
Re: Think this will make car fast? (Teg4e)
yeah they are nice but really loud I want to put a resonator on mine but I hate to cut into such a fine piece
Chris
Chris
#9
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">Custom = Crush bent.</TD></TR></TABLE>
This is an assumption!!
Theres two local shops near me that call them custom exhaust installs, and both places mandrel bend!
This is an assumption!!
Theres two local shops near me that call them custom exhaust installs, and both places mandrel bend!
#10
Honda-Tech Member
Re: Think this will make car fast? (nsxmatt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxmatt »</TD></TR><TR><TD CLASS="quote">
Custom = Crush bent.
</TD></TR></TABLE>
Bullshit.
Only if you take it too a crappy local exhaust shop.
Custom = Crush bent.
</TD></TR></TABLE>
Bullshit.
Only if you take it too a crappy local exhaust shop.
#13
Honda-Tech Member
Re: Think this will make car fast? (Bryson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bryson »</TD></TR><TR><TD CLASS="quote">
Bullshit.
Only if you take it too a crappy local exhaust shop. </TD></TR></TABLE>
I wasn't talking in general, I was talking about his setup. Sounds like I struck a nerve there touchy, calm down
Bullshit.
Only if you take it too a crappy local exhaust shop. </TD></TR></TABLE>
I wasn't talking in general, I was talking about his setup. Sounds like I struck a nerve there touchy, calm down
#14
Thread Starter
Join Date: Oct 2003
Location: Northern, PA, USA
Posts: 1,454
Likes: 0
Received 0 Likes
on
0 Posts
Re: Think this will make car fast? (nsxmatt)
Thanks for all the comments guys! I know I didnt need to make a post about it but I was so excited and had to share in the thrills As far as the custom exhaust goes it can be non-crush bent. My friend had a 2.5" made with elbow pieces and straight pipe then the shop just welded everthing up. I could have gone that route but I had an extra $500 burning a whole in my pocket. Lol yeah.....
#18
Thread Starter
Join Date: Oct 2003
Location: Northern, PA, USA
Posts: 1,454
Likes: 0
Received 0 Likes
on
0 Posts
Re: (integranator)
Everyone keeps telling me how loud it is. I cant see how it will be any louder than my tanabe racing medallion. I will still have a 3" high flow cat.
#19
Honda-Tech Member
Join Date: Jun 2003
Location: NYC bitchessss
Posts: 9,555
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RedTegLS)
I'm pretty sure it's quieter than the Tanabe. There was a post on here with sound clips of the exhaust. Not sure if it was in the FI fourm though.
#21
Honda-Tech Member
Join Date: Aug 2003
Location: Tucson, AZ, USA
Posts: 1,618
Likes: 0
Received 0 Likes
on
0 Posts
Re: Think this will make car fast? (Barney Ruble)
very nice man....3 inch is the only way to go....even though i will be doing a 2.5 inch exhaust because i think a 3 inch is overkill for the greddy 18g
#22
Member
Join Date: Feb 2003
Location: Montreal, QC, Canada
Posts: 1,850
Likes: 0
Received 0 Likes
on
0 Posts
anyway some people dont have the time to get their exhaust made by a shop ... buy the right one the first time is priceless IMO ... Mine have been made by hand and it is not the quality of Thermal...
#23
Re: Think this will make car fast? (NVturbo)
[QUOTE=NVturboNice exhaust system...... Too bad you paid over $500 for yours..while I paid $150 for mine ( 3" Dynomax round muffler w/ 3" custom-bent ]
hey same **** here did you do all aluminized and U-bends? talk about loud as hell though.
#24
Honda-Tech Member
well i have custom 3 inch mandrel bent piping and a hks carbon/titanium exhaust...love it to death...i never really like thermals products but hey to each there own
#25
Honda-Tech Member
Join Date: May 2002
Location: Illanoise, USA
Posts: 3,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: (m R g S r)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by m R g S r »</TD></TR><TR><TD CLASS="quote">I'm pretty sure it's quieter than the Tanabe. There was a post on here with sound clips of the exhaust. Not sure if it was in the FI fourm though.</TD></TR></TABLE>
My thermal is 5 times louder than my Tanabe ever was. Exact same motor and everything. Both are catless setups too!!!
My thermal is 5 times louder than my Tanabe ever was. Exact same motor and everything. Both are catless setups too!!!