Thanks "The Shodan"
01-07-2011, 10:55 AM
#1
Honda-Tech Member
Thread Starter
Thanks "The Shodan"
Came home from the gym to find the UPS guy had made a stop at my house!
Thanks again for the reaper!
hoping to crack 500whp this summer with this thing!
Also wanted to add: For anyone interested in this turbo and how it went, contact TheShodan. Mac was very courteous and knowledgeable in the product he sells and answered all my questions fully before I went through with the purchase and the product was delivered to me in a timely manner and well packaged. Would definitely do business with him again.
Thanks again for the reaper!
hoping to crack 500whp this summer with this thing!
Also wanted to add: For anyone interested in this turbo and how it went, contact TheShodan. Mac was very courteous and knowledgeable in the product he sells and answered all my questions fully before I went through with the purchase and the product was delivered to me in a timely manner and well packaged. Would definitely do business with him again.
Last edited by AlexDphoto; 01-08-2011 at 08:34 AM.
01-07-2011, 11:58 AM
#2
Re: Thanks "The Shodan"
Congrats curious to see some results on this unit. Remember reading a little about it here previous.
To keep it a bit tech related... curious what the wheel measurements are on these? What kind of power these looking to be capable of?
To keep it a bit tech related... curious what the wheel measurements are on these? What kind of power these looking to be capable of?
01-07-2011, 12:02 PM
#3
Honda-Tech Member
Thread Starter
Re: Thanks "The Shodan"
Here is what I was able to find on google, these measurements may not reflect the exact ones on my unit. Anything else and you would have to contact TheShodan himself!
http://www.s2ki.com/forums/index.php?showtopic=799679
http://www.s2ki.com/forums/index.php?showtopic=799679
01-07-2011, 12:05 PM
#4
Honda-Tech Member
Thread Starter
Re: Thanks "The Shodan"
Here is my setup that the turbo will be working with
81.5mm GSR
10:1 wiseco pistons
Eagle rods
ACL bearings
Port flow stage 1 built head
Spoolin Mini Ram
Tial 38mm wg
3 inch kteller exhaust
3 inch down pipe
Ultimate Racing Intercooler
SRE IC piping
Skunk 2 Intake Manifold
FIC 1000cc Injectors
Trending Topics
01-07-2011, 10:52 PM
#8
Honda-Tech Member
Thread Starter
01-07-2011, 11:20 PM
#11
Honda-Tech Member
Join Date: Jun 2006
Location: knockin boots in, Ohiooooo, USA
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Re: Thanks "The Shodan"
idk i know him and i were talking about it before thanksgiving. I dont care though. just sayings. haha hope u enjoy it.
01-08-2011, 08:31 AM
#13
Honda-Tech Member
Thread Starter
01-09-2011, 08:15 AM
#19
Honda-Tech Member
Re: Thanks "The Shodan"
That depends on exactly what options you go with. Journal or ball bearing, coatings/anodizing or not. Of course from a performance standpoint, I hear you can't go wrong with what The Shodan recommends. If I ever upgrade or decide to change from the route I went I'll be asking him for his service, great guy from what I can tell.
01-09-2011, 10:11 AM
#20
Honda-Tech Member
Join Date: Jan 2005
Location: Lower Right Hand Corner, PA
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: Thanks "The Shodan"
"The Shodan" has been a member on these forums for quite some time and always gives out great information. I'm not surprised at all that people are happy with his services, as from all of the years I've been on this website all I've ever seen him do is help us.
I missed the link the first time, looks like a pretty nasty turbo. I'm pretty happy with my Precision, but I love seeing technology come out to make these things better and better.
I missed the link the first time, looks like a pretty nasty turbo. I'm pretty happy with my Precision, but I love seeing technology come out to make these things better and better.
01-09-2011, 11:47 AM
#21
Honda-Tech Member
Thread Starter
Re: Thanks "The Shodan"
x2!
you would have to contact theshodan
not necessarily new, what numbers are you referring to
In the link I read that on the T04B housing (maybe E I forgot) it said this turbo is capable of 680hp on race gas
That depends on exactly what options you go with. Journal or ball bearing, coatings/anodizing or not. Of course from a performance standpoint, I hear you can't go wrong with what The Shodan recommends. If I ever upgrade or decide to change from the route I went I'll be asking him for his service, great guy from what I can tell.
"The Shodan" has been a member on these forums for quite some time and always gives out great information. I'm not surprised at all that people are happy with his services, as from all of the years I've been on this website all I've ever seen him do is help us.
I missed the link the first time, looks like a pretty nasty turbo. I'm pretty happy with my Precision, but I love seeing technology come out to make these things better and better.
I missed the link the first time, looks like a pretty nasty turbo. I'm pretty happy with my Precision, but I love seeing technology come out to make these things better and better.
It looks nasty, cant wait to see how it performs
01-09-2011, 05:05 PM
#24
Honda-Tech Member
Thread Starter
Re: Thanks "The Shodan"
The one thing I wished there was more of when I was researching this turbo, were dyno graphs of it being used on honda applications and even videos of it.
But I couldnt find any, so this year, Ill try my best to document everything with graphs and videos.
But I couldnt find any, so this year, Ill try my best to document everything with graphs and videos.
01-09-2011, 05:54 PM
#25
Honda-Tech Member
Join Date: Jan 2005
Location: Lower Right Hand Corner, PA
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: Thanks "The Shodan"