t4 to t3 flange adapter
#1
Honda-Tech Member
Thread Starter
t4 to t3 flange adapter
I just recently bought a t4 full race manifold because it was a great deal, i have been looking for turbo's and t4's are hard to come by in small sizes it seems. I am looking for around a 6o trim. I have thought about cutting off the t4 flange and having my friend weld on a t3 but i would have to touch the mani its so pretty, how are the flange adapters good? Or should i just cut off the t4 and weld a t3? This is if i cant find a good used t4 and have to go with a t3...
#2
Honda-Tech Member
Join Date: Dec 2004
Location: Jacksonville, FL, usa
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
Re: t4 to t3 flange adapter
you will not find a small T4 because it's generally a size for bigger displacement motors. just get an adapter for it on ebay for 30 bucks, and run the common 57 trim or something.
If you're asking questions like this I doubt you're going for big numbers anyway.
If you're asking questions like this I doubt you're going for big numbers anyway.
#3
Honda-Tech Member
Thread Starter
Re: t4 to t3 flange adapter
Yea i know about the sizing and t6 is next for really large turbo's..... i just wanted to ask how the adapters were i am looking for a 57 to 60 or slightly larger like you said only looking to hit 450 hp.
#4
Honda-Tech Member
Join Date: Dec 2004
Location: Jacksonville, FL, usa
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
Re: t4 to t3 flange adapter
you might be able to find them cheaper if you look
http://cgi.ebay.com/ebaymotors/T3-to...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/T3-to...QQcmdZViewItem
#5
Honda-Tech Member
Thread Starter
Re: t4 to t3 flange adapter
you might be able to find them cheaper if you look
http://cgi.ebay.com/ebaymotors/T3-to...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/T3-to...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/OBX-T...3A1|240%3A1318
Thread
Thread Starter
Forum
Replies
Last Post