i jwas just curious to hear some output of peoples numbers runnign a t3/t4. I dont care what boost its at, im just wondering how much they can handle

so just post up : boost level (lbs) and WHP your running with it.
Thanks guys.


PS: also after a t3/t4 what would be a good upgrade, i am lookgin into a ballbearign t4, but just curious.......I personally am shotting for a turbo to handle up to 25lbs and cap. of around 450 power wise....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prelude994e &raquo;</TD></TR><TR><TD CLASS="quote">i jwas just curious to hear some output of peoples numbers runnign a t3/t4. I dont care what boost its at, im just wondering how much they can handle

so just post up : boost level (lbs) and WHP your running with it.
Thanks guys.


PS: also after a t3/t4 what would be a good upgrade, i am lookgin into a ballbearign t4, but just curious.......I personally am shotting for a turbo to handle up to 25lbs and cap. of around 450 power wise....</TD></TR></TABLE>

Guy.. Do you know how many combinations of T3/T04E hybrids there are? Can you be a bit more specific as to what you are looking for? There's over 10 companies that make a turbo like that. Please be a little more specific and what application (engine) you're inquiring about.

 

Most T4/T3 turbo power outputs range from 400whp to 600whp. If you're only looking for 450hp, a straight T4 would be too big for you.

 

my bad bro i was just looking for a general range, but its the T04 / T3 from the DRAG gen4 kit, its made by turbonetics, it is not ball bearing, and i dont know the trim or anything. i was told its only good up to maybe 350whp, i hope it can pump out a little more

 

The turbo you're referring to supports 450whp. We've seen more than that from the B trim turbo in the Gen 4 kit but 450whp is about average.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prelude994e &raquo;</TD></TR><TR><TD CLASS="quote">my bad bro i was just looking for a general range, but its the T04 / T3 from the DRAG gen4 kit, its made by turbonetics, it is not ball bearing, and i dont know the trim or anything. i was told its only good up to maybe 350whp, i hope it can pump out a little more</TD></TR></TABLE>

No worries. I guess I get a little edgy due to the fact that people always want to know how high the horsepower something gets without getting or understanding all the facts associated with the power..