Is a T3/ Super 60 too big?
#1
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: Dec 2004
Location: Panama City Beach, Fl.
Posts: 1,428
Likes: 0
Received 0 Likes
on
0 Posts
Is a T3/ Super 60 too big?
I've got a mini me turbo right now. I'm getting ready to fully build a D16Z6 block with a Y8 head. My goal is 280-300 whp daily and I was wondering if this turbo would be too big, if I keep the compression around 9.5. If so what would be a good size turbo to run.
#2
Re: Is a T3/ Super 60 too big? (BoostedEgHatchFl)
Im gunna b running a t3/t4 50 trim .48 ar on my d16y8 with viataras boostin around 15psi, .
the 50 trim wont be to laggy and it will hit hard in the top.
I think the t3 might be to small if your building your motor.
the 50 trim wont be to laggy and it will hit hard in the top.
I think the t3 might be to small if your building your motor.
#3
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: Dec 2004
Location: Panama City Beach, Fl.
Posts: 1,428
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is a T3/ Super 60 too big? (SohcPower)
So your saying b/c its a t3 it may be too small??? I'll be running it on my stock mini me motor while hte other motor gets build. Viataras I've heard of these pistons but how strong r they. I don't plan on sleeving the block.Just use a block gaurd.
#4
Re: Is a T3/ Super 60 too big? (BoostedEgHatchFl)
I dont plan plan on sleeving either thats why im going with the vitaras, i think aiming for 300whp no sleeves your really pushing the stock block, Im hoping for around 260 daily driven. Im confident that its very doable with the setup im going with.
=Ive done alot of research before i bought the turbo i did, i wanted to make sure i wasnt going to be dissapointed , going with a smaller turbo .
=Ive done alot of research before i bought the turbo i did, i wanted to make sure i wasnt going to be dissapointed , going with a smaller turbo .
Thread
Thread Starter
Forum
Replies
Last Post
Full Race A6
Forced Induction
2
09-20-2004 08:04 AM