spring,retainer,valve question
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2012
Location: south jersey
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
spring,retainer,valve question
i recently purchased a b16 head that had supertech springs,retainers and valves and was wondering if the head is all its cracked up to be so i figured id post it and see if its legit well any ways here it is
if anyone needs any other angle or type of picture just ask id like to figure this out before i put the longblock together thanks
if anyone needs any other angle or type of picture just ask id like to figure this out before i put the longblock together thanks
#3
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: spring,retainer,valve question
So lemme understand. You purchased it NOT knowing what it was you were spending your money on? And now you need someone to tell you that you did good or not?
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2012
Location: south jersey
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Re: spring,retainer,valve question
no i did know what i was spending my money on i am just double checking to see if it was a good buy or not. im just really wondering about the valves themselves.
#5
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: spring,retainer,valve question
Oh! You know what you have but don't know about the valves? And if you wasted your money?
Here. The Google search you should have done before you posted this up.
https://www.google.com/webhp?sourcei...w=1904&bih=929
Here. The Google search you should have done before you posted this up.
https://www.google.com/webhp?sourcei...w=1904&bih=929
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Aug 2012
Location: south jersey
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post