i get dibs weds, but it looks to be wet
i need to fix my ign problem anyways

 

Coming from 880 the best way to get there is to:
1)get off at Mission BLVD exit
2)turn left on Warm Springs Blvd.
3)Warms Springs BLVD turns into Osgood (at the cross street Grimmer)
4)Redzone is about 3 streets past frys on the left, its the turn before the Gravel/Rock Place.

 

Great stuff!

but i'm trippin out cuz it's in the warmsprings district..

I used to work right there..

 

Actually its irvington disctrict, but close enough.

 

I know it's late but good luck fellas.

 

thanks. still got lots of movin to do..

p.s we do in house header fabrication *cough* i got some B series headers in stock too. nah mean ?

 

been by the new shop, it's sick as hell..its great now i just hop my fence go over the railroad tracks and bam(literally) there you are jeremy! man can't get any better, wait a second when you get the dyno even better

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Quad-Damage &raquo;</TD></TR><TR><TD CLASS="quote">i get dibs weds, but it looks to be wet
i need to fix my ign problem anyways</TD></TR></TABLE>

yup you get it weds, but we will not tune int he rain....to much tirespin

 

man, your car needs to get out of the hsop...Im going to see if I can get a little bit more done this week...maybe get it started before christmas

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedZone &raquo;</TD></TR><TR><TD CLASS="quote">man, your car needs to get out of the hsop...Im going to see if I can get a little bit more done this week...maybe get it started before christmas </TD></TR></TABLE>


ohhh I hope thats for me! if so f*cking sweet *** sweet best xmas present ever if so!

 

Yo jeremy is my block almost done getting timeserted? I never left a number for you guys to call me back at.

 

so two seperate companies under the same roof...sounds like droping two pit bulls in a cage together

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2k.civic.si &raquo;</TD></TR><TR><TD CLASS="quote">so two seperate companies under the same roof...sounds like droping two pit bulls in a cage together </TD></TR></TABLE>

more like 2 different company's that do 2 different things under the same roof to bring more service's to the public....

 

one stop shop!

 

That's one dope *** combination...even better for me since you guys are closer to my area... Best of luck to ya Phil

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedZone &raquo;</TD></TR><TR><TD CLASS="quote">

more like 2 different company's that do 2 different things under the same roof to bring more service's to the public.... </TD></TR></TABLE>


redzone= ALL MOTOR SPECIALISTS- tranny rebuilds- Motor builds all mtoor and Boost, sleeving, portwork, custom fabrication, JDM front ends, RHD conversions, full street to full race car can all be done

SPoolin= Turbo specialists, in house aluminum tig, stainless tig, mig tig, turbo manifolds, headers, custom intake pipes, intercooler piping, inhouse turbo distribution/wastegates.


SPoolin and redzone= Cage fabrication, backhalfed drag setups, 1 kick *** ****** shop,.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by project dc2 &raquo;</TD></TR><TR><TD CLASS="quote">
SPoolin and redzone= Cage fabrication, backhalfed drag setups, 1 kick *** ****** shop,. </TD></TR></TABLE>

I think I would agree with that. But you should move it to carlisle Pa.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93turbo16 &raquo;</TD></TR><TR><TD CLASS="quote">I think I would agree with that. But you should move it to carlisle Pa. </TD></TR></TABLE>

nahhh we love em just where they are

 

4 redzone and spoolin

i've met both and they're good people,
good to know they're all under the same roof

 

bring that comfy chair back down stairs for the customers!

Thanks for the tune yesterday guys.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sketch_hs &raquo;</TD></TR><TR><TD CLASS="quote">bring that comfy chair back down stairs for the customers!

Thanks for the tune yesterday guys.</TD></TR></TABLE>

how did the tune feel? and did you fix the boost issue?

 

when's the official grand opening?

 

we are trying for mid jan

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RedZone &raquo;</TD></TR><TR><TD CLASS="quote">how did the tune feel? and did you fix the boost issue?</TD></TR></TABLE>

Feel great. There was a leak going to the MBC.

I need an electronic gear biased boost controller now. no traction in 1st or 2nd at all


Anyone want a Halman MBC? $40 Bucks!

Thanks Redzone... i'll be back soon to tune the cam gears and throw her on the dyno

 

Im happy to hear you found the problem....