skunk2 pro 2 cams
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: reading, pa, united states
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
skunk2 pro 2 cams
im have a built b16 a with a 81 mmbore block the head is stock with crowder valves springs and retainers and 3 angle valve job . my turbo is a precision sc 34 60 ar cold and 63 hot ma question is can i use the skunk 2 pro 2 cam with this set up or is it worth it i run a 3 in dp 38 mm tial wastegate skunk 2 66 mm tb and itr manifold. rc autoworks ramhorn
#2
Re: skunk2 pro 2 cams (redflaredcrx90)
Those cams are way too aggressive for a boosted setup, especially with a small turbo like yours. The most aggressive I would recommend with your setup is ITR/CTR cams.
#4
Re: skunk2 pro 2 cams (Dartanian)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dartanian »</TD></TR><TR><TD CLASS="quote">Those cams are way too aggressive for a boosted setup.</TD></TR></TABLE>
not true
not true
#5
Honda-Tech Member
Join Date: Sep 2002
Location: Allentown, PA, USA
Posts: 6,663
Likes: 0
Received 0 Likes
on
0 Posts
Re: skunk2 pro 2 cams (SwappedTURBOegg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SwappedTURBOegg »</TD></TR><TR><TD CLASS="quote">
not true
</TD></TR></TABLE>
Yeah no kidding
not true
</TD></TR></TABLE>
Yeah no kidding
#7
Honda-Tech Member
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: skunk2 pro 2 cams (SwappedTURBOegg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SwappedTURBOegg »</TD></TR><TR><TD CLASS="quote">
not true
</TD></TR></TABLE>
stop knitpicking...
not true
</TD></TR></TABLE>
stop knitpicking...
Trending Topics
#8
Honda-Tech Member
Re: skunk2 pro 2 cams (blinx9900)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blinx9900 »</TD></TR><TR><TD CLASS="quote">stop knitpicking...</TD></TR></TABLE>
"nitpicking"
Now that's nitpicking!
"nitpicking"
Now that's nitpicking!
#9
Honda-Tech Member
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: skunk2 pro 2 cams (rmcdaniels)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rmcdaniels »</TD></TR><TR><TD CLASS="quote">
"nitpicking"
Now that's nitpicking!</TD></TR></TABLE>
thanks, i was honestly really wondering if it was knit or nit and touche!
"nitpicking"
Now that's nitpicking!</TD></TR></TABLE>
thanks, i was honestly really wondering if it was knit or nit and touche!
Thread
Thread Starter
Forum
Replies
Last Post
mikeycivic
All Motor / Naturally Aspirated
6
03-11-2007 09:29 AM