<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jz98ctr &raquo;</TD></TR><TR><TD CLASS="quote">nice mani...good job brad....
hey umm SOHC....u got a phat *** mani and a turbo....
yet you are using home electrical wire nuts for your injector wires???
they add mad resistance to the line
since the ecu and injectors work off of resistance...won't this cause your injectors to not work properly????
solder+heatshrink tubing
wirenuts </TD></TR></TABLE>

that isn't his car, but way to talk **** in brads thread

 

Whos ever car that is , its some ghetto *** wiring HAHA, that mani looks great to Brad to whoever hacked up those injectors

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by . a d a m &raquo;</TD></TR><TR><TD CLASS="quote">

that isn't his car, but way to talk **** in brads thread </TD></TR></TABLE>

I'm not talking nothing......Where were my DERRAGATORY comments????
i was just asking a question and stating what i was seeing.
after spending over $5000 in schooling for 12 volt electronics and over 12 years EXPERIENCE working on vehicles electrical systems...simple stuff to custom fabrication for just about any vehicle...seeing wire nuts in a vehicle makes the veins in my forehead pop out
i wasn't trying to talk smack or slam anyone
brad's the man

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jz98ctr &raquo;</TD></TR><TR><TD CLASS="quote">I'm not talking nothing......Where were my DERRAGATORY comments????
i was just asking a question and stating what i was seeing.
after spending over $5000 in schooling for 12 volt electronics and over 12 years EXPERIENCE working on vehicles electrical systems...simple stuff to custom fabrication for just about any vehicle...seeing wire nuts in a vehicle makes the veins in my forehead pop out
i wasn't trying to talk smack or slam anyone
brad's the man</TD></TR></TABLE>

Alright, maybe I jumped the gun a little bit, but it just seemed a little bit excessive. I agree with you, it is pretty ghetto. No hard feelings man.

 

I stay away from any company than ends with -fab.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by The Original Whitey &raquo;</TD></TR><TR><TD CLASS="quote">I stay away from any company than ends with -fab.</TD></TR></TABLE> Good for you!!! We Know Brad does Great work Your Loss

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OBRJosh &raquo;</TD></TR><TR><TD CLASS="quote"> Good for you!!! We Know Brad does Great work Your Loss</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jz98ctr &raquo;</TD></TR><TR><TD CLASS="quote">nice mani...good job brad....
hey umm SOHC....u got a phat *** mani and a turbo....
yet you are using home electrical wire nuts for your injector wires???
they add mad resistance to the line
since the ecu and injectors work off of resistance...won't this cause your injectors to not work properly????
solder+heatshrink tubing
wirenuts </TD></TR></TABLE>

LOL!!! Yeah it does look rigged? Thing is it was 38* degrees outside and we couldnt get the solder to work. I wire nutted them to get the car started to check out the system. It' was a temp. thing, It'll be solder'd lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue &raquo;</TD></TR><TR><TD CLASS="quote">Here are some pics of a manifold setup he just made this past week </TD></TR></TABLE>

your right, his camera is better than mine!!

Cannon $1200 &gt; Walmart sale Samsung $400

 

Brad does good stuff...
we are LS-T regulars...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMs1eeper &raquo;</TD></TR><TR><TD CLASS="quote">your right, his camera is better than mine!!

Cannon $1200 &gt; Walmart sale Samsung $400

</TD></TR></TABLE>
lol i think yours could take better pics if you took it off auto

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMs1eeper &raquo;</TD></TR><TR><TD CLASS="quote">

LOL!!! Yeah it does look rigged? Thing is it was 38* degrees outside and we couldnt get the solder to work. </TD></TR></TABLE>

Ahhh.....yea...*** this cold *** weather...MORE clothing on the women and shitty outdoor working conditions...my *** was not made for da cold
i need that tubular log mani for now man...i'll be asking you a little later to make me a sick one off mani....hit me up....Jmadigee@yahoo.com(pms don't seem to be working)
Brad

 

oops sorry man....i shoulda checked my e-mail b4 i posted that one.
e-mail received
need contact info

 

I would also like to know what turbos I might be able to squeeze in there.
I was hoping maybe a gt3071r or gt3076r
and which side does the compressor sit on?

 

welds looked really good. i may go your way for my next mani to save on shipping

 

BUMP 4 Brad

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jz98ctr &raquo;</TD></TR><TR><TD CLASS="quote">BUMP 4 Brad</TD></TR></TABLE>
HEY BRAD...I'LL GIVE YOU ANOTHER BUMP IF YOU GET ON PUTTING SOME CONTACT INFO ON YOUR SITE SO I CAN GIVE YOU SOME $$$ AND I CAN GET A MANI....****
sorry bout the caps man...wasn't yelling...i can't type while i look at the screen haha ...and i didn't realize the caps

 

Hey a guy in VA that builds manifolds!!!!! Im sorta looking around for a new manifold.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jz98ctr &raquo;</TD></TR><TR><TD CLASS="quote">HEY BRAD...I'LL GIVE YOU ANOTHER BUMP IF YOU GET ON PUTTING SOME CONTACT INFO ON YOUR SITE SO I CAN GIVE YOU SOME $$$ AND I CAN GET A MANI....****
sorry bout the caps man...wasn't yelling...i can't type while i look at the screen haha ...and i didn't realize the caps </TD></TR></TABLE>

PM'd you contact info

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ringgold &raquo;</TD></TR><TR><TD CLASS="quote">Hey a guy in VA that builds manifolds!!!!! Im sorta looking around for a new manifold.</TD></TR></TABLE>

No problem I'm in the Richmond area

Have a great week! and a Happy Halloween!

 

 

lol

 

Brad is currently been working on my top mount these past 2 weeks and i cant wait to see it. He is also doing my down pipe, my intercooler, my intercooler piping, dump tube ect ect ect... pretty much Brad is doing my turbo kit.

S-Fab Top mount manifold
S-Fab 3" Down pipe
S-Fab Dump tube
S-Fab Intercooler piping
OBX intercooler
T70 turbo
Greddy style Bov
Tial 44mm external wastegate

Mat Shue (SOHC_MShue) his friend is tuning my 00 si on chrome as soon as brad gets everything put together and ready for me. they are both deff good guys to do business with and i cant wait to have everything on my si

 

pics arnt that great.

 

Those are Superman welds You must of had your cape on then Lol


Modified by OBRJosh at 7:16 PM 11/1/2006

 

Can't wait to get mine!!