is this rods and pistons are good? ( vid inside )
#1
is this rods and pistons are good? ( vid inside )
it came from a runing motor (d16z6)
but the pistons starting to make some big noise
is the rods are still good ? and what you say about the pistons?
its srp pistons and eagle rods
http://www.youtube.com/watch?v=aR0DMnapAdA
but the pistons starting to make some big noise
is the rods are still good ? and what you say about the pistons?
its srp pistons and eagle rods
http://www.youtube.com/watch?v=aR0DMnapAdA
#2
Member
Join Date: Apr 2002
Location: Dallas, Tx, USA
Posts: 1,029
Likes: 0
Received 0 Likes
on
0 Posts
Re: is this rods and pistons are good? (KoKo)
it are go good with pizza
your english and video sucketh.
rods PROBABLY fine.... but the vague info and bad picture quality?
ask the machine shop. that question isnt really to be answered on the internet with pictures. too many variables and critical measurements involved that a computer screen isnt capable of.
Modified by agrn93ls at 9:23 AM 7/12/2007
Modified by agrn93ls at 9:23 AM 7/12/2007
your english and video sucketh.
rods PROBABLY fine.... but the vague info and bad picture quality?
ask the machine shop. that question isnt really to be answered on the internet with pictures. too many variables and critical measurements involved that a computer screen isnt capable of.
Modified by agrn93ls at 9:23 AM 7/12/2007
Modified by agrn93ls at 9:23 AM 7/12/2007
#4
Honda-Tech Member
Re: (KoKo)
looks like the pistons were in contact with the cylinder walls...look at the scruffs on the pistons. Don't know about the rods, but they seem okay. Do you have a pic of the block...take one of the cylinder walls.
Thread
Thread Starter
Forum
Replies
Last Post