Personal choice on rods; brand, style, price and where to get them.

 

im ordering the full race rods... manley rod with a larger bolt.
Ive also ran crowers with no problems.
And not to mention the eagle rods have worked well for me on a moderate built b16 turbo

... i say go with crower or manley(full race)

 

Check out these rods by ef-1
http://ef-1.zeroforum.com/zerothread?id=6

Machined better then eagle rods and a larger 10mm arp rod bolt. I can get you these rods for $375 shipped. Let me know if your interested. Paul

 

broke a set of crower rods using pauter now

 

using a set of custom Pauter. I was tired of wearing out wrist pin bushings on other rods so i had them widen this part of the rod and lengthen it for the deck plate

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted3g &raquo;</TD></TR><TR><TD CLASS="quote">using a set of custom Pauter. </TD></TR></TABLE>

WORD

 

I run Eagle with no problems. They are far from the srtogest but they work well. My brother runs Pauter and they are definately a lot stronger. What about Cunningham? I remember alotof import's such as Papadakis, Kubo, Rado were running them, not to mention Turbocharged Mustangs.

 

I run Pauter as well.. good rod.

 

Crower or Pauter for high hp cars only.

 

I am looking for something with an I beam design. Either the probe rods or some from CPRparts.com. both under $400

Import Builders has some for under $400 as well.



Modified by ARACER25 at 2:21 PM 10/19/2003