jdm92teg

i have a b20 in my DA integra and am thinkin about boostin it wit drag kit. i here alot of people say that b20 cylinder walls are weak so i was jus curious what was the max psi on a completely intenrally stock b20. only upgrades i have are i/h/e and act clutch. thanks for the info.

D3LSLO

10

vaporboy12

not boost its power and safe tuning

jdm92teg

thanks. well then what is max psi boost or whatever with proper tuning done on hondata?

bare

Unless Drag has dramatically 'improved' their Turbo kits I would RUN away from those things.
Pure Hillbilly in my observation opinion.

Blaze45

PM'd u with more info.

ATYPR

9-10psi and Drag SUXX

jdm92teg

bump for info

B20T CRX

it depends on your set-up and tune, but we've had some of our friends make 270-300whp on about 9-12psi. first thing get the stock B20 cams out and put some LS or crower cams in it. go with a a good size T3/T4 and it should be fun.

jdm92teg

thanks. my setup will be completely stock everything except act clutch, intake, and exhaust. at least for a little while till i get more money. and yues this will be dyno tuned

scottishdave

Be careful man. Tune it very very well. Those walls dont hold well.

jdm92teg

yea im trying to have it boosted within a month and ill have it trailered to get it tuned. dont even wann try risking anything. where i live no one has a dyno in town so ill probably have to go to tallahassee to get it tuned. thanks for all the info

turboeg77

10psi should be fine. try going with a vtec head as well.

PRELUDE-GT35R

Have it tune ---> push it to the MAX and ----> let us know