This is the air-liquid intercooler we'll be using on our 2140cc turbo development platform for a very short charge piping configuration between compressor outlet and ITB plenum. It will be mounted right above the transmission. Here's a link from the mfg's website:

http://precisionturbo.net/prod...er=no

-Ron

 

Ever consider laminova?

 

They have an interesting approach to their integrated heat exchangers. Maybe I'll try it next time. We're way behind schedule as it is already.

-Ron

 

Nice IC!!! I just sold 3 PT1000 to some MR2 guys, they had the PT900s on order BUT since the PT1000 was soooo minimal in price increase they jupmed on them!

 

I didn't see the PT1000 listed on their website. I was actually thinking about the PT1200, but that's overkill right now since I can't run the GT42R with our current manifold. The PT900 shouldn't have a problem even if we're maxing out our T3/T67 H.O. Just taking baby steps this go around.

-Ron

 

We have an entire new series of liquid-to-air intercoolers that are much smaller and perform better. Haven't updated the site for a while as we are too deep in the new catalog project right now . . . trying to get it ready for SEMA. Will post some pix, however, if you guys want to see it.

BTW, nice photography!

 

Rod, are these new cores available for public consumption now? Any additional information you can provide is greatly appreciated. Pix would be nice!

-Ron

 

Are they available with just the core too?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by daveG &raquo;</TD></TR><TR><TD CLASS="quote">Are they available with just the core too? </TD></TR></TABLE>
Air to water or Air to air cores available sir. Contact me if interested on the Precision cores sir. Running to the dyno be back later though

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">Air to water or Air to air cores available sir. Contact me if interested on the Precision cores sir. Running to the dyno be back later though </TD></TR></TABLE>

Damn it you have all my money already. Maybe after this winter when I get some more money I'll order one from you.

 

Boostfed is right. We have the cores and the complete intercoolers. He can help you out with that. Just shot the new intercoolers. Will put up on the web site by next week.