Possible vacuum problem after going back to stock!!!
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Location: ca, USA
Posts: 2,306
Likes: 0
Received 0 Likes
on
0 Posts
Possible vacuum problem after going back to stock!!!
Well I finally got the JRSC off my 94 gsr and had the stock manifold back on and everything installed...Everytime I start up the car the rmp shoots up to aroud 3.5/4k rpm...and stays there...so I shut it off and double checked all my vacuum lines but everything seems normal.....etc...so now I am stuck...only thing I can think is that I am using a 96+ gsr IAB vavle/vacuum tank (number 9 and 10 in the pic) instead of one from a 94/95...reason why is because I been having a hard time finding it so I jsut said why not just try the 96+ to see if it works....this is a possible problem..but maybe there is somethign...any ideas would help guys>thx
Modified by Ringbearer020 at 7:20 AM 8/10/2005
Modified by Ringbearer020 at 7:20 AM 8/10/2005
Thread
Thread Starter
Forum
Replies
Last Post
Honda_RN
Northern California (Sales)
7
08-06-2005 06:22 AM
Honda_RN
Acura Integra
11
08-02-2005 08:39 PM