Pictures of equal length manifold.
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: FULL RACE, AZ, USA
Posts: 4,719
Likes: 0
Received 0 Likes
on
0 Posts
Pictures of the Full-Race Motorsports equal length manifold.
Made from the same stuff as the log style manifolds (8 gauge forged 304, 167 thou wall thickness tubing) and has 1/2" flanges all the way around. Wastegate placement specified by the customer.
This manifold has no wastegate port on it right now, and it doesnt have the flange slotted. That was done after the pics were taken.
[Modified by FFgeoff, 11:17 AM 5/28/2002]
This manifold has no wastegate port on it right now, and it doesnt have the flange slotted. That was done after the pics were taken.
[Modified by FFgeoff, 11:17 AM 5/28/2002]
#2
Honda-Tech Member
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pictures of equal length manifold. (FFgeoff)
how different is the turbo placement compared to the first design?
What are the possible wastegate locations? middle of the collector?
it looks like you have a place circled for the wastegate location but i know i don't have room for one there.
Will the original first design downpipes fit?
What are the possible wastegate locations? middle of the collector?
it looks like you have a place circled for the wastegate location but i know i don't have room for one there.
Will the original first design downpipes fit?
Trending Topics
#20
Honda-Tech Member
Join Date: Oct 2000
Location: Zoo York
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pictures of equal length manifold. (BoostinDC2)
damn geoff... every manifold is getting nicer and nicer! and i dont see any problem of it fitting in a street car... the only manifolds that u really cant fit into a street car i would say are manifolds like papadakis' and bergonholtz's... most other will fit