ohio builders (columbus)
04-22-2005, 04:30 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: AZ, usa
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
ohio builders (columbus)
are there any other builders in ohio? im gonna have slowmotion racing build as in install my turbo kit, just winderin if there were anybody else out there.
04-23-2005, 05:43 AM
#5
Member
Re: ohio builders (steves98itr247)
You can hit up IPS Motorsports in Columbus. I too Could also help you out with the build. PM me and I can give you some phone numbers to help you out.
Trending Topics
04-23-2005, 10:30 PM
#9
Honda-Tech Member
Re: (fqnjdmboy)
slowmotion is a good shop, but i also have taken my stuff to M&M head service out of delaware. they do great work as well, and have decent prices.
04-24-2005, 12:42 AM
#10
Re: (platinum00)
I am sure there is a good shop in Columbus so you wouldn't have to drive all over the state. Dayton: Colletti Motorsports( http://www.collettimotorsports.com ), Cincinnati: Raceline Tuning ( http://www.racelinetuning.com )
04-25-2005, 06:57 PM
#11
Honda-Tech Member
Join Date: Aug 2002
Location: Columbus, Ohio, U.S.
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Re: (platinum00)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by platinum00 »</TD></TR><TR><TD CLASS="quote">slowmotion is a good shop, but i also have taken my stuff to M&M head service out of delaware. they do great work as well, and have decent prices.
</TD></TR></TABLE>
I'd be careful with M&M!!!! So far every bottom end i have seen built by them has smoked like crazy! In the past year I have seen....2 honda blocks with one of the pistons in backwards, a couple sunkin sleeves, valve guides not put in correctly. I mean c'mon....these pistons were 12:5:1...how could you not notice with that dome that they were in backwards???
</TD></TR></TABLE>
I'd be careful with M&M!!!! So far every bottom end i have seen built by them has smoked like crazy! In the past year I have seen....2 honda blocks with one of the pistons in backwards, a couple sunkin sleeves, valve guides not put in correctly. I mean c'mon....these pistons were 12:5:1...how could you not notice with that dome that they were in backwards???
04-26-2005, 04:16 AM
#15
Honda-Tech Member
Re: (MYDA9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MYDA9 »</TD></TR><TR><TD CLASS="quote">
I'd be careful with M&M!!!! So far every bottom end i have seen built by them has smoked like crazy! In the past year I have seen....2 honda blocks with one of the pistons in backwards, a couple sunkin sleeves, valve guides not put in correctly. I mean c'mon....these pistons were 12:5:1...how could you not notice with that dome that they were in backwards??? </TD></TR></TABLE>
really, i have had 2 blocks built there with no problems. oh well slo-mo it is then.
I'd be careful with M&M!!!! So far every bottom end i have seen built by them has smoked like crazy! In the past year I have seen....2 honda blocks with one of the pistons in backwards, a couple sunkin sleeves, valve guides not put in correctly. I mean c'mon....these pistons were 12:5:1...how could you not notice with that dome that they were in backwards???
</TD></TR></TABLE>really, i have had 2 blocks built there with no problems. oh well slo-mo it is then.
04-26-2005, 04:27 AM
#16
Junior Member
Join Date: May 2004
Location: Cincinnati, OH, USA
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Re: (platinum00)
Four very reputable shops in Cincinnati. Zerolift (www.zerolift.com), BASZ Racing, Raceline (www.racelinetuning.com), and Total Performance Racing (www.tprcincy.com). Best tuning out of those shops: Zerolift (Dave Blundell) and Raceline (Rick [forget last name]). Check 'em out. 
04-26-2005, 02:37 PM
#17
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: AZ, usa
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Re: (platinum00)
aww, you guys are makin me all tingly and warm inside with all these great comments about slow mo. may 18th my car goes in! i will keep you guys all updated!
10-27-2005, 02:30 PM
#20
Honda-Tech Member
Join Date: Oct 2004
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Re: (USDM 4G VTEC)
i've seen bad things come out of colletti although they are affiliated with some strong partners including mid ohio scca. I say tpr all the way great customer service and the motors are incredible. Rob the shop owner is a wiz with honda anything.
10-27-2005, 04:22 PM
#23
Honda-Tech Member
Join Date: Jun 2005
Location: Elyria, OH, US
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
tpr racing sucks(cincy)... i won a bid on a "jdm b18c gsr full swap" on ebay from them, drove four hours there, look at the engine code and it says b18c1 (usdm), in the ad it stated the hp, tq, and cr of the jdm one also. stupid crooks...we were thinkin about getting shipped too, good thing we didnt
10-27-2005, 06:38 PM
#25
Honda-Tech Member
Join Date: May 2004
Location: Cincinnati, Ohio, us
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civicskater)
Are you kidding me?
its not our fault you did not ask a single question nor contact us about a jdm/usdm swap......
calling crooks, you were refunded every penny with out any question.
we sell
over 20 engines a month so it was not a big deal to us.
But we offered to give you a "jdm" b18c but you did not want it.
the b18c1 had LSD
but i guess the JDM b18c open diff is better in your book
noobies new to the scene....
Back on topic
Modified by The Show Stopper at 4:01 AM 10/28/2005
Modified by The Show Stopper at 4:01 AM 10/28/2005
its not our fault you did not ask a single question nor contact us about a jdm/usdm swap......
calling crooks, you were refunded every penny with out any question.
we sell
over 20 engines a month so it was not a big deal to us.
But we offered to give you a "jdm" b18c but you did not want it.
the b18c1 had LSD
but i guess the JDM b18c open diff is better in your book
noobies new to the scene....
Back on topic
Modified by The Show Stopper at 4:01 AM 10/28/2005
Modified by The Show Stopper at 4:01 AM 10/28/2005