new some help with calculations.....
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Emo land, Utah, USA
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
need some help with calculations and recommendations.....
ok this is for a friends project I'm helping.
The car is a 98 EX Y8. T25 turbo, Mitsu SMIC, Vortech FMU, DSM 550 CC's, B&M FPR, P2P ECU, walbro 255
On timing it's .5 retard = per pound of boost with 16 BTDC correct? now with 7 pounds I would retard timing to 12 or should I keep it at 13?
the guy can't afford hondata or VAFC hack at this time so wanting to know what I can to to check timing and also to tune on the butt dyno or give some recommendations
Modified by Ninja_Jc7 at 10:05 PM 11/6/2003
The car is a 98 EX Y8. T25 turbo, Mitsu SMIC, Vortech FMU, DSM 550 CC's, B&M FPR, P2P ECU, walbro 255
On timing it's .5 retard = per pound of boost with 16 BTDC correct? now with 7 pounds I would retard timing to 12 or should I keep it at 13?
the guy can't afford hondata or VAFC hack at this time so wanting to know what I can to to check timing and also to tune on the butt dyno or give some recommendations
Modified by Ninja_Jc7 at 10:05 PM 11/6/2003
Thread
Thread Starter
Forum
Replies
Last Post
DsMWookie
Forced Induction
4
09-05-2003 11:39 PM