new car!
12-13-2006, 10:45 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: garner, ia, usa
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
MY CAR! enging bay shave! repaint rebuild boosted h22 eg hatch! :D
BOUGHT:
I sold my b16 eg hatch and now i have a built h22 eg hatch im goin to be boosting it soon. it is at 10.5c/r im tryin to go for about 500 whp on race gas. wish me luck
car is untuned for all of this right now but im not goin to pay to tune two times since it is getting boosted soon.
h22
sleeved
rods
je pistons
crower stg2 cams
3angle
balanced bottom end
hasport mounts
apexi exhaust soon to have none just an open downpipe or i might go with an electric cut out-$$ though
flywheel
act clutch
tein super street coilovers
cam gears
aem FPR
fuel rail
walbro pump
UPDATE!!!!!!!!!!!!! read!
update new pics of items i bought! some i havnt posted like small interior trim glove box kick plate uder steering wheel. **** and all kinds of ****! now i just wait for it. i dont have pics of the intercooler custom built 50mm tial flange on hot side. 2.5 inch inlet and 3" oulet. 3"x22"x12" core and all my piping will be getting tigged by my instructor (wyotech)
650cc injectros from an eagle talon (aftermarket)
v band dp. with 3 inch pipe coming too
gauges and all of that im lookin at a throttle body and manifold need an oil drain and some other small parts the large **** is done and paid for too im forgettuing **** but im just trying to keep everyone updated! :D
UPDATE!!! 1/16/07
came with brand new SI wheels and tires
i need to get ride of the full face radiator setup though for a half size.
here is the dash and cluster swap im goin to be doing also.
what i did over xmas break! 12/25-12/27/06
OLD DASH OUT!!!!!!
little bit of wiring to do! works perfectly! :D excited!
old dash and new dash(new dash is almost completly gutting weighing half as much as the other. :D
IN THE CAR LOOKING GOOOOOD!!!
WHAT I BOUGHT TODAY! :D
2/9/o7
been workin on it all week. bought some new parts for manifold suince mine isnt goi to work.. my bov got lost in the mail and intercooler are on their way and same with the new manifold.
Modified by jared50438 at 8:08 PM 12/14/2006[IMG]
blew it up in may
i have a new darton sleeved block!!
here is the block i dont have many uploaded yet you can see where it melted and leaned out and too much pressure.
here are some pictures of my ****, whats been taking up my weekends for a while.
stock(kinda)
part way though
this is what i have been doin all summer after i blew my engine haha
Modified by jared50438 at 7:01 PM 8/20/2007
Modified by jared50438 at 7:05 PM 8/20/2007
Modified by jared50438 at 11:07 AM 9/1/2007
I sold my b16 eg hatch and now i have a built h22 eg hatch im goin to be boosting it soon. it is at 10.5c/r im tryin to go for about 500 whp on race gas. wish me luck
car is untuned for all of this right now but im not goin to pay to tune two times since it is getting boosted soon.
h22
sleeved
rods
je pistons
crower stg2 cams
3angle
balanced bottom end
hasport mounts
apexi exhaust soon to have none just an open downpipe or i might go with an electric cut out-$$ though
flywheel
act clutch
tein super street coilovers
cam gears
aem FPR
fuel rail
walbro pump
UPDATE!!!!!!!!!!!!! read!
update new pics of items i bought! some i havnt posted like small interior trim glove box kick plate uder steering wheel. **** and all kinds of ****! now i just wait for it. i dont have pics of the intercooler custom built 50mm tial flange on hot side. 2.5 inch inlet and 3" oulet. 3"x22"x12" core and all my piping will be getting tigged by my instructor (wyotech)
650cc injectros from an eagle talon (aftermarket)
v band dp. with 3 inch pipe coming too
gauges and all of that im lookin at a throttle body and manifold need an oil drain and some other small parts the large **** is done and paid for too im forgettuing **** but im just trying to keep everyone updated! :D
UPDATE!!! 1/16/07
came with brand new SI wheels and tires
i need to get ride of the full face radiator setup though for a half size.
here is the dash and cluster swap im goin to be doing also.
what i did over xmas break! 12/25-12/27/06
OLD DASH OUT!!!!!!
little bit of wiring to do! works perfectly! :D excited!
old dash and new dash(new dash is almost completly gutting weighing half as much as the other. :D
IN THE CAR LOOKING GOOOOOD!!!
WHAT I BOUGHT TODAY! :D
2/9/o7
been workin on it all week. bought some new parts for manifold suince mine isnt goi to work.. my bov got lost in the mail and intercooler are on their way and same with the new manifold.
Modified by jared50438 at 8:08 PM 12/14/2006[IMG]
blew it up in may
i have a new darton sleeved block!!here is the block i dont have many uploaded yet you can see where it melted and leaned out and too much pressure.
here are some pictures of my ****, whats been taking up my weekends for a while.
stock(kinda)
part way though
this is what i have been doin all summer after i blew my engine haha
Modified by jared50438 at 7:01 PM 8/20/2007
Modified by jared50438 at 7:05 PM 8/20/2007
Modified by jared50438 at 11:07 AM 9/1/2007
12-14-2006, 09:24 AM
#6
Honda-Tech Member
Re: (jared50438)
H22s are definitely fun. I'm running an built H in a 92 hatch with 10:1 Arias pistons. Turbo is a GT30 with an .82 a/r. With 700cc injectors it's making 465 whp and 344 wtq on $5 gal. c120 race gas (113 octane). I'm going to 950cc precision injectors and considering E85 (85%ethanol) pump gas. You need about 1/3 more fuel but it costs around $2 gal. (it's around 107 octane and runs cooler)
Even with BFG DRs and lower power levels (300s) look for wheelspin in gears 1-3.
Even with BFG DRs and lower power levels (300s) look for wheelspin in gears 1-3.
Trending Topics
12-15-2006, 08:50 PM
#15
Honda-Tech Member
Join Date: Jan 2005
Location: b00sting my D16s, SoWis, USA
Posts: 7,015
Likes: 0
Received 7 Likes
on
5 Posts
Re: new car! new pics big plans NO 56K large photos (jared50438)
The 2nd pic won't be understood by people outside the 'salt belt'. 
I can't see much FI tech here, but it looks like the groundwork has been laid. Its supposed to be a mild winter, so don't wait for spring!
I can't see much FI tech here, but it looks like the groundwork has been laid. Its supposed to be a mild winter, so don't wait for spring!
12-27-2006, 03:19 PM
#18
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: garner, ia, usa
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Re: new car! new pics big plans NO 56K large photos UPDATE* (jared50438)
UPDATE got my dash and cluster in! a lot of cutting so i didnt have to buy a integra fans but that will get removed sometime anyways once i pic up another daily driver. this car is coming together nicely the door panels were giving my trouble i will ahve to pull the vinyl back and reglue oncei the weater warms up again.turbo parts should be on there way soon.
12-27-2006, 04:38 PM
#21
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Location: garner, ia, usa
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Re: (eg:R)
no thanks on the trade im just getting started on this one :D and the door panles turned out OK just needs to be warmer and i will reglue the drivers side but i cut them perfectly.
12-28-2006, 06:09 PM
#25
Junior Member
Join Date: Apr 2006
Location: Clear Lake, IA, USA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
let there be boost
Hey there guy! That dash looks REALLY impressive! What did it come from? Any fitment problems? Keep us updated.
P.S. Do you wish you still had that 57 trim?
P.S. Do you wish you still had that 57 trim?