evilsolb16

i live in the kissimmee orlando area and was looking for someone to tune on crome. i have the ecu ready for chip. i just need to chip burned and installed. any one know of someone or can do it let me know.

tallyturbo

if your in the jax area i could help out and if im not available i know a couple friends who might be able to help.

Frozen E

How about those CFT guys? Central Florida Turbo.

Soccerking3000

look at the first thread on the page....

Soccerking3000

Florida

John Vega
-http://www.phearable.net
-Crome Professional, Uberdata, Hondata, Neptune, Turbo Edit, Zdyne, AEM, Apexi afcs & more!
-Ecu Chipping / Socketing services & Chipped ecus ready to ship!

Nathan - Section Eight Tuning
-Melbourne, FL
-Phone: 321.213.7458
-Email: http://nate@natesbox.com
-HT Name: .nate
-AEM, AFC, E-Manage, CROME, Hondata, LS1 Edit, Turbo Edit, Zdyne

Jason Koehler
-Location: Macon, but travels - North FL, Central/South GA, East AL.
-Software: AEM, Hondata, K-Pro, Crome-Pro
-http://www.JKOBD.com
-Email: http://Turbo_ek@yahoo.com
-Tuning services, engine building, wiring harnesses, ecu chipping.

Drag-On Resources
-Brian Mcmahan
-Sanford, FL
-Tuned anything from all motor Honda up to 3500hp 600inch twin turbo Dodge big block
-AEM, DSM, Crome, DFI, UBER, Big Stuff 3, Motec etc..
-Two Superflow in-ground One wide rool 2 wheel and one AWD.
-HT: Sohfast94 PM
-386-290-9205
-http://sohfst94@yahoo.com
-http://Bmcmahan@superchips.com

XAT Racing
-Tampa, Florida
- http://www.XATRacing.com
-(813)-875-RACE
- sales@XATRacing.com
-Custom chipping for Nissans, Power FC, Megasquirt, E-Manage, SAFC/VAFC. in the past they said they'd learn another system if i brought it to them to check it out, so i possibly Crome/UD and the like are game.

Mase
-Gainesville, FL & Jacksonville, FL but often travels
-Hondata, AEM, Motec, UTEC, ETC.
-AIM: MaseTuning
-Email: masetuning@yahoo.com
-Website: http://www.MaseTuning.com


Modified Racing Inc (M.R.I)
-John Solero
-2196 Penfield Terr North Port FL, 34288
-HT: Blown99civicSi
-Shop #(941)628-4988
-Email: http://JjsTTSupra@verizon.net / http://ModifiedRacingInc@Verizon.net
-Street Tuning,Dyno Tuning, Discounted Dyno rates, AEM, Haltech, Crome, Uberdata, Hondata, Neptune, and more!

John Wilson
-LHT Performance.net Since '97
-6330 46th street N,Pinellas Park, FL, 33781
-727 344 1800
-HT: CRVRX
-Hondata, K-Pro, Zdyne ( Authorised dealer)Plus others
-Full Fabrication shop

Dave Espinosa
-Miami/Naples, Fl
-305-986-9563
-E-mail: http://vtccivic@aol.com
-Website: http://www.tuner-solutions-online.com
-AOL: VTC CiViC
-Uberdata, Crome, Hondata, AEM, AFC, Tunercat, Autotap logging etc..
-Complete street tunes w/ option to dyno @ local dyno's

evilsolb16

i know about the tuner page the only things is i work all day and go to uti at night so its hard to find time. i work from 730-430 then i have have to drive an hour to get home and then get ready for school form 7-12 at night so i was trying to find someone i the orlando kissimmee area that could do it on the weekend. the ecu i have has already had crome in it i just need a new chip burned so i can put it in.

Soccerking3000

well give some of them a call i bet they will be more than willing to do some tuning for you on the weeknds

evilsolb16

how much do they charge to burn a new chip

Soccerking3000

burn a chip? i would assume that some of them would do it for free lol as long as you provide the chip and rom

evilsolb16

the chome program that is on it was just for brake in on my boys ls vtec. it has rev limit set a 3000rpm. so i need to reprogramed or whatever.

tallyturbo

to tune your car its not going to take one burn. it will take several. are you looking to get a quick basemap or something

evilsolb16

yea something like that. just something to use till i get the money for hondata

Soccerking3000

ohh well i can sent you a good basemap for you car if you'd like for them to burn it for you i'm sure they'd do it reaaaaaal cheap or even free as stated before

dpetro1

well first of all i wouldnt recommned driving around for a long period of time on just a basemap and you definitely shouldnt boost on a basemap. hit up one of those guys in the tuner directory get the car completely tuned with crome, even if its just a street tune.

i dont see why you need to "save up for hondata" you already have a great EMS program with crome. it can do just about anything hondata can do and im sure you'll be happy with it. unless of course you prefer hondata, its your call cause its you car.

tallyturbo

if you chip ill make you a basemap for free. then i will just mail it back to ya. all you will need to tell me is your setup.

evilsolb16

how much do they charge for a street tune?

tallyturbo

i dunno. do you already have a wideband?

evilsolb16

i have a jdm b16 gsr cams, aem cam gears, 255 fuel pump, obdI prelude injectors 310s i think, aem fuel rail, nrg f/p/r, aebs intake manifold, t3/t4 turbo, drag turbo manifold, 2.5" downpipe&exhaust, hondata intakemanifold gastket, arp headstuds

evilsolb16

dont have a wideband

tallyturbo

i can burn you a basemap but it will probably be rich. when i burnt mine i was and i fouled plugs like every other week. best bet is to street tune. i think it will only cost like 70-100 bucks maybe more depending on who is doing it. if its a buddy it will prob be cheap as hell

evilsolb16

if you would send me the base map, they have a dyne day on saturday that has wideband. so i will be able to tell how rich it is.

evilsolb16

where can i find a chip burner

dpetro1

street tunes could vary. id say $50-$200, again depending on who it is. id grab a basemap, looks like tallyturbo can hook you up. then go get it tuned soon after. like he said it would probably be rich (better than lean) and you wouldnt wanna drive on it too much.

are you sure 310's are gonna cut it though? i think they would be maxed out at about 220hp or so.

since you already have the p&h prelude injectors, you could probably switch the the higher flowing dsm 450's for cheap. they should be good to 300hp or so.

dpetro1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by evilsolb16 &raquo;</TD></TR><TR><TD CLASS="quote">where can i find a chip burner</TD></TR></TABLE>

well if tally is gonna send you a chip you shouldnt need a burner. but if you wanna start doing some tuning yourself it would be good to have. check out
http://www.moates.net/product_...id=48

evilsolb16

well right now im on an fmu but i am trying to get off it. its running fine with it but i would rather not have it. i dyno 205hp and 151 on 5psi untuned with the fmu. im trying to get it tuned but school is breaking the pockets.