need some help with a turbo install
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: frankfort kentucky
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
need some help with a turbo install
so i recently purchesed a cheap turbo for my first turbo install on 1993 honda del sol d16z6 and i need some help and i got alot of questions can any one help me with this ?
#2
Honda-Tech Member
Join Date: Feb 2001
Location: cc,tx, USA
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
Re: need some help with a turbo install
look in the faq at the top of the page, if you still need help come back and ask some specific questions so we can help you better.
#4
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: frankfort kentucky
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Re: need some help with a turbo install
that didnt really work to well . i basically just have a few really stupid questions i dont really wanna ask cause i feel stupid asking them .. like i need some help on tapping the back of the engine block for the oil feed line .. i have every thing necessary but i just wanna know the proper way be cause this is my daily driver as well as in the future a just a fun drag car.. i had a friend who was gonna help me but he bailed on me. i also need help with wiring in a resistor box.. and for some reason when i bolt up my charge piping to make sure i dont need to cut and modify it my t-bolt clamp wont work for the charge pipe connecting to the throttle body .. any ideas i have a few more questions . but i'll get to those later . thanks guys
#5
Honda-Tech Member
Join Date: Feb 2001
Location: cc,tx, USA
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
Re: need some help with a turbo install
I dont know what your trying to tap, your oil line kit should have come with an adapter that will screw into the block at the oil pressure sensor, again there are some good pics and how to in the faq https://honda-tech.com/forums/forced-induction-16/complete-how-turbocharge-your-honda-rep-ing-hypnotik-speed-1263795/
I dont really understand the problem with the t-bolt clamp, Is it just the wrong size? If so the just get the right size clamp. Again lots of info on the resistor box in the faq here is one link there are 4 more if you look https://honda-tech.com/forums/forced-induction-16/resistor-box-wiring-441107/
I dont really understand the problem with the t-bolt clamp, Is it just the wrong size? If so the just get the right size clamp. Again lots of info on the resistor box in the faq here is one link there are 4 more if you look https://honda-tech.com/forums/forced-induction-16/resistor-box-wiring-441107/
#6
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: frankfort kentucky
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Re: need some help with a turbo install
hey guys thankf for all the help but i wont be continueing my project for away , i think i totaled my car today i was hit by a hummer spun 360 degree's around into a telephone poll. i posted pics for everyone to see , we'll this made my 19th birthday comming up on the 22 just ****ing great .. thanks for the help guys .
Thread
Thread Starter
Forum
Replies
Last Post
ekb16a
Honda Civic / Del Sol (1992 - 2000)
59
06-21-2007 10:02 PM