email me Lemon_ice_4u@hotmail.com

 

 

contact www.trickengineering.com he might have one like this he built this one ask for jeff

 

that looks nice how much boost do those sleeves hold? do you know?

 

anyone? someone has to have a GE block sittin around!

 

 

 

I've got an H23 bottom end. It needs a little repair. It has Darton sleeves, installed by RS. It also has Crower rods. It broke a piston, and damaged 1 rod and 1 sleeve. Obviously, it also needs pistons now. I also have a 4 stage dry sump oiling setup for it, as well as an electric water pump, AEM cam gears, Ultra R crank pulley, and even reverse rotation top end setup if you're interested. You can reach me at:
cnchawks@***.net
or
760-788-9337

 

well i just cracked a valve on my h23 yesterday, the block is GE sleeved, crower rods, arias .020" over 8.5:1 pistons, balanced and micropolished crank, with all the machining that has been done to the block the overall CR is 9.1:1, about 3-4k on the block, i was just gonna get a new head for the mean time, but if the price is right i would be willing to part w/ my block, and just go h22 NA......

 

all i need is a sleeved bare block willing to pay 1,000+ trade some stuff....let me know

 

if its a closed deck h22 thats fine too.