my street car update..
#1
Honda-Tech Member
Thread Starter
my street car update..
well here it is, im hoping to have this thing running in about a week or so.... im still waitng on misc bs, and i got a few odd's and ends to tie up.
here are a few pics of Kteller8 3 inch aluminum intercooler piping. i got a bunch of bends off of him and cut/ weld as neccessarry.
i got all my guages finally done, the ignition and speedpro are ready to go. all thats left is stuff in the engine bay. and than its off to the dyno to see it all blow to pieces.
enjoy, i am
Autometer guages for days
intercooler piping shots
this is where i will put my B.O.V. this bov is a greddy type-r model with the stiff spring.
Side Exit, 3 inch downpipe
not to noticeable
you can barely see it in this pic(the downpipe)
here are a few pics of Kteller8 3 inch aluminum intercooler piping. i got a bunch of bends off of him and cut/ weld as neccessarry.
i got all my guages finally done, the ignition and speedpro are ready to go. all thats left is stuff in the engine bay. and than its off to the dyno to see it all blow to pieces.
enjoy, i am
Autometer guages for days
intercooler piping shots
this is where i will put my B.O.V. this bov is a greddy type-r model with the stiff spring.
Side Exit, 3 inch downpipe
not to noticeable
you can barely see it in this pic(the downpipe)
#4
Honda-Tech Member
Thread Starter
Re: my street car update.. (0x64)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">Looking good Dturbocivic! Can't wait to see it running. What intake manifold?</TD></TR></TABLE>
jg/ edelbrock (sp) i got it off of jotech awhile back, i had it extrude honed, and NDC welded on a 75mm adapter plate for my 75mm Holley mustang throttle body. inside the tb port is all opened up to 3 inch. also, instead of my TB opening the "traditional" honda way... my tb opens side to side, instead of up/ down.
jg/ edelbrock (sp) i got it off of jotech awhile back, i had it extrude honed, and NDC welded on a 75mm adapter plate for my 75mm Holley mustang throttle body. inside the tb port is all opened up to 3 inch. also, instead of my TB opening the "traditional" honda way... my tb opens side to side, instead of up/ down.
Trending Topics
#13
Re: my street car update.. (Dturbocivic)
[QUOTE=Dturbocivic]
i got all my guages finally done, the ignition and speedpro are ready to go. all thats left is stuff in the engine bay. and than its off to the dyno to see it all blow to pieces.
really?....keep us posted....make sure you take alotta pics....what do you think will happen?...hole in piston?...hole in block?...fried rings?.....blown head gasket?....well, keep us up to date, i can't wait...i love destruction.
i got all my guages finally done, the ignition and speedpro are ready to go. all thats left is stuff in the engine bay. and than its off to the dyno to see it all blow to pieces.
really?....keep us posted....make sure you take alotta pics....what do you think will happen?...hole in piston?...hole in block?...fried rings?.....blown head gasket?....well, keep us up to date, i can't wait...i love destruction.
#17
Honda-Tech Member
Join Date: Sep 2003
Location: Boost is good
Posts: 3,166
Likes: 0
Received 0 Likes
on
0 Posts
Re: my street car update.. (IMSTOCK)
Holy ****.. If that was my setup, I would at least put a TINY resonator pipe on the EXIT downpipe. -=P You will definately scare away mustangs!! Looks damn good. -=D Easy do, simply no hassle with exhaust leaks. lolz. -=P
#21
Honda-Tech Member
Join Date: Jul 2002
Location: Tri Cities Diddy, IL
Posts: 1,665
Likes: 0
Received 0 Likes
on
0 Posts
Re: my street car update.. (hulkhb)
thats your STREET car? damn.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hulkhb »</TD></TR><TR><TD CLASS="quote">damn thats tight man. I recently did a side exit exhaust through the bumper via 3.5" e-cutout and love it. </TD></TR></TABLE>
lets see it.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hulkhb »</TD></TR><TR><TD CLASS="quote">damn thats tight man. I recently did a side exit exhaust through the bumper via 3.5" e-cutout and love it. </TD></TR></TABLE>
lets see it.
#23
Honda-Tech Member
Join Date: May 2002
Location: Deutschland, Germany
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Re: my street car update.. (synik)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by synik »</TD></TR><TR><TD CLASS="quote">Holy ****.. If that was my setup, I would at least put a TINY resonator pipe on the EXIT downpipe. -=P You will definately scare away mustangs!! Looks damn good. -=D Easy do, simply no hassle with exhaust leaks. lolz. -=P </TD></TR></TABLE>
Are you talking about that red mustang in the background?
Are you talking about that red mustang in the background?