My Setup (Feedback Welcomed, Be Nice)
Thread Starter
Joined: Jan 2004
Posts: 86
Likes: 0
From: Beachwood, NJ, 08722
My Setup (Feedback Welcomed, Be Nice)
Outside...
Audi Laser Red Base and Clear coat finish.
Enkei Samurai 16" wheel with brand new tires all 4
Spoon look alike Carbon Fiber Duckbill Wing
JDM black Housing headlights and Corners with Hyper white bulbs
Inside...
APEXi V-AFC II
Autometer Air fuel Gauge
Autometer 20lb Boost Gauge
Autometer 2 gauge 2 1/16 gauge pod
Kenwood speakers in the front doors
Boss Tweeters in the rear pillars
Everything else is factory
Under the Hood.
1997 D16Y8 SOHC VTEC motor with approximately 65,000 miles
1997 EX Transmission same mileage
MSD Blaster external coil
MSD 8.5mm Wires
PTE SC50 T3/T04E Turbo good for 480HP
PTE 350HP Intercooler
Custom Fabircated Piping (NEATLY DONE AND PAINTED )
GReddy Type S Blow off Valve
Turbo-netics Evolution 35mm external wastegate, not the cheap delta-gate
GReddy 2mm headgasket
ARP 10mm headstuds
DNA motorsports manual boost controller (Set to 12psi)
Bosch 465cc injectors with resistors
B&M Fuel Pressure Regulator
Energy Suspension Poly Urethane Motor Mount Inserts
ACT street clutch with Heavy Duty Pressure Plate.
Accessories...
Viper/DEI Alarm system with MOTION DETECTOR and REMOTE START installed
Walbro 255lph high flow fuel pump
Turbo XS chipped P28 ECU
Arospeed Coilovers
OBX Camber kit in the front
For Pictures: Go Here
http://groups.msn.com/NJTurboCivic/shoebox.msnw
Modified by NJTurboCivic at 10:09 PM 2/29/2004
Audi Laser Red Base and Clear coat finish.
Enkei Samurai 16" wheel with brand new tires all 4
Spoon look alike Carbon Fiber Duckbill Wing
JDM black Housing headlights and Corners with Hyper white bulbs
Inside...
APEXi V-AFC II
Autometer Air fuel Gauge
Autometer 20lb Boost Gauge
Autometer 2 gauge 2 1/16 gauge pod
Kenwood speakers in the front doors
Boss Tweeters in the rear pillars
Everything else is factory
Under the Hood.
1997 D16Y8 SOHC VTEC motor with approximately 65,000 miles
1997 EX Transmission same mileage
MSD Blaster external coil
MSD 8.5mm Wires
PTE SC50 T3/T04E Turbo good for 480HP
PTE 350HP Intercooler
Custom Fabircated Piping (NEATLY DONE AND PAINTED )
GReddy Type S Blow off Valve
Turbo-netics Evolution 35mm external wastegate, not the cheap delta-gate
GReddy 2mm headgasket
ARP 10mm headstuds
DNA motorsports manual boost controller (Set to 12psi)
Bosch 465cc injectors with resistors
B&M Fuel Pressure Regulator
Energy Suspension Poly Urethane Motor Mount Inserts
ACT street clutch with Heavy Duty Pressure Plate.
Accessories...
Viper/DEI Alarm system with MOTION DETECTOR and REMOTE START installed
Walbro 255lph high flow fuel pump
Turbo XS chipped P28 ECU
Arospeed Coilovers
OBX Camber kit in the front
For Pictures: Go Here
http://groups.msn.com/NJTurboCivic/shoebox.msnw
Modified by NJTurboCivic at 10:09 PM 2/29/2004
Thread Starter
Joined: Jan 2004
Posts: 86
Likes: 0
From: Beachwood, NJ, 08722
Re: My Setup (tHIS oNE)
http://groups.msn.com/NJTurboCivic/shoebox.msnw
They are here.. sorry for that **** poor attempt to try to look cool.
Modified by NJTurboCivic at 8:49 PM 2/29/2004
They are here.. sorry for that **** poor attempt to try to look cool.
Modified by NJTurboCivic at 8:49 PM 2/29/2004
Trending Topics
Joined: Oct 2002
Posts: 2,976
Likes: 0
From: ATX/HTX
Re: My Setup (NJTurboCivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NJTurboCivic »</TD></TR><TR><TD CLASS="quote">http://C:\DocumentsandSettings\Chris\MyDocuments\MyPictur es\farmotor.bmp</TD></TR></TABLE>
u cant post pics from your computer
u cant post pics from your computer
Thread Starter
Joined: Jan 2004
Posts: 86
Likes: 0
From: Beachwood, NJ, 08722
Re: My Setup (tHIS oNE)
http://groups.msn.com/NJTurboCivic/shoebox.msnw
Once again, here is where the pictures are. No dynochart until the summer when I get a new digital camera and find them lol they are probably with my recipts.
Once again, here is where the pictures are. No dynochart until the summer when I get a new digital camera and find them lol they are probably with my recipts.
Joined: Oct 2003
Posts: 2,806
Likes: 0
From: DFW, TX
Re: My Setup (NJTurboCivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NJTurboCivic »</TD></TR><TR><TD CLASS="quote">guess it sucks... nobody even looks :-( lol j/k</TD></TR></TABLE>
maybe just nobody cares
maybe just nobody cares
Member
Joined: Aug 2001
Posts: 5,084
Likes: 0
From: Baltimore, maryland, usa
Re: My Setup (HXMan)
Secure the oil feed line a little better, I think its the oil feed line anyway.. Dont want that thing jumping around under the hood.. Other then that the turbo setup looks good.. Was it you that got the 1.012 RT.. If so you really try to stay away when drag racing 
Honda-Tech Member
Joined: Jun 2002
Posts: 2,105
Likes: 0
From: Florida, us
Re: My Setup (NJTurboCivic)
that car looks familar i seen that car in melbourne florida, and he ran that car at bithlo 13.0@105. you live in new jersey did you buy this car from that person?
Thread Starter
Joined: Jan 2004
Posts: 86
Likes: 0
From: Beachwood, NJ, 08722
Re: My Setup (airshifta)
Yeah, I did. We've been talking for a good while now lol, he's awesome. I'm not taking credit for his hard work either, although I am going to be doing my fair share as soon as the weather brightens up
Joined: Jun 2003
Posts: 575
Likes: 0
From: KW, ON Canada
Re: My Setup (issues4)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by issues4 »</TD></TR><TR><TD CLASS="quote">What kind of tires did you run for the 13.0?
</TD></TR></TABLE>
yeah what he said.
</TD></TR></TABLE>yeah what he said.
sh!t happens.
Joined: Apr 2003
Posts: 7,734
Likes: 0
From: greenVILLE, SC
Re: My Setup (92BlackSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92BlackSi »</TD></TR><TR><TD CLASS="quote">
yeah what he said.</TD></TR></TABLE>
???????????//// let us know
yeah what he said.</TD></TR></TABLE>
???????????//// let us know
