my hmt setup
Thread Starter
Junior Member
Joined: Dec 2002
Posts: 34
Likes: 0
From: manchester, nj, us
my hmt setup
well here it is, in a 94 ex coupe:
b16
endyn block posts
arp headstuds
clutch specialties unsprung 6 puck
custom manifold, 304L tubes, ms flanges :-X
cca intercooler
custom charge pipes (mostly made out of mustang tailpipes
)
550 rx-7 injectors
IHI turbo from a 6.5L GM diesel (about 7 psi, spikes to 9)
stealthmode oil feed line, custom return
running uberdata with the ostrich, running untuned until wednesday
bad shot of my cca (im parked up against some bushes and couldnt get a better angle)
b16
endyn block posts
arp headstuds
clutch specialties unsprung 6 puck
custom manifold, 304L tubes, ms flanges :-X
cca intercooler
custom charge pipes (mostly made out of mustang tailpipes
)550 rx-7 injectors
IHI turbo from a 6.5L GM diesel (about 7 psi, spikes to 9)
stealthmode oil feed line, custom return
running uberdata with the ostrich, running untuned until wednesday
bad shot of my cca (im parked up against some bushes and couldnt get a better angle)
Member
Joined: Jun 2002
Posts: 4,448
Likes: 0
From: US
Re: my hmt setup (redturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redturbocivic »</TD></TR><TR><TD CLASS="quote">i like the home made top mount</TD></TR></TABLE>
ditto, nice setup you got there. How much did everything cost you roughly?
ditto, nice setup you got there. How much did everything cost you roughly?
Member
Joined: Nov 2004
Posts: 1,792
Likes: 0
From: Kitchener, Ontario, Canada
Re: my hmt setup (Deluzional)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Deluzional »</TD></TR><TR><TD CLASS="quote">
ditto, nice setup you got there. How much did everything cost you roughly?</TD></TR></TABLE>
... and what kind of numbers will it put to the ground?
ditto, nice setup you got there. How much did everything cost you roughly?</TD></TR></TABLE>
... and what kind of numbers will it put to the ground?
Trending Topics
Thread Starter
Junior Member
Joined: Dec 2002
Posts: 34
Likes: 0
From: manchester, nj, us
Re: my hmt setup (CycloneBlue_1.6EL)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Deluzional »</TD></TR><TR><TD CLASS="quote">
ditto, nice setup you got there. How much did everything cost you roughly?</TD></TR></TABLE>
umm,
manifold: about 160 in parts after shipping (cost quite a bit)
intercooler: 180
injectors: 75
chipped ecu with datalogging: 125
ostrich:175
turbo:175
piping: free
couplers: free from diesel mechanic friend
oill line: 30
return: about 15 bucks
gauges: 30 bucks
thats 965 (im sure there was more money spent on little **** too that i forget), but the ostrich was a gift from my gf
and the flanges were a gift too
As for numbers i wont know for a bit, but my goal is 300whp. Ill be turning up the boost and tuning it next week after i get a fuel pump and mbc and toss in a friends WB. After that ill be finding a track in the near future, maybe a dyno too.
ditto, nice setup you got there. How much did everything cost you roughly?</TD></TR></TABLE>
umm,
manifold: about 160 in parts after shipping (cost quite a bit)
intercooler: 180
injectors: 75
chipped ecu with datalogging: 125
ostrich:175
turbo:175
piping: free
couplers: free from diesel mechanic friend
oill line: 30
return: about 15 bucks
gauges: 30 bucks
thats 965 (im sure there was more money spent on little **** too that i forget), but the ostrich was a gift from my gf
and the flanges were a gift too As for numbers i wont know for a bit, but my goal is 300whp. Ill be turning up the boost and tuning it next week after i get a fuel pump and mbc and toss in a friends WB. After that ill be finding a track in the near future, maybe a dyno too.
Thread
Thread Starter
Forum
Replies
Last Post
*Boostwerks*
Honda / Acura
36
Jul 1, 2007 08:23 PM
